4.0

7
Introduction
About Mackie Control XT
Mackie Control XT 8 channel extender units are also sup-
ported. All faders and encoder/displays are combined into
one continuous surface. The following applies:
• When the encoder section is used to display the data
for one channel (channel strip mode, or for plug-ins), the
parameters are presented over the encoder section of all
devices, from left to right.
• Fader bank navigation and encoder section assignment
is controlled by the Mackie Control unit.
• For each Mackie Control and Mackie Control XT unit, a
new device needs to be added in the Device Setup.
For each device select the appropriate MIDI ports.
• In the Device List, the top-most device represents the
right-most channels, and vice versa.
Please make sure that the used MIDI ports are deactivated in the “All
MIDI Inputs” device.