3.0

CUBASE SX/SL
Tascam US-428 10 – 39
Cubase SX/SL mixer
The following US-428 controls will remote control the following mixer
parameter for each channel strip:
• Fader: volume
• Mute/Solo: mute and solo (selected via the Solo switch)
• Select: selects channel for editing
• Pan-Dial: pan
• EQ-Gain
Controls the EQ gain for each band selected with the Low, LoMid, HiMid and High
buttons. These correspond to the four EQ bands in Cubase SX/SL, starting from the
leftmost band.
• EQ-Freq
Controls the EQ frequency for each band selected with the Low, LoMid, HiMid and
High buttons. These correspond to the four EQ bands in Cubase SX/SL, starting from
the leftmost band.
• EQ-“Q”
Controls the EQ “Q” for each band selected with the Low, LoMid, HiMid and High but-
tons. These correspond to the four EQ bands in Cubase SX/SL, starting from the left-
most band.
• Aux 1 to Aux 4 and shuttle wheel:
The effect send levels for sends 1 to 4.
• The shuttle wheel will act as position shuttle if no Aux send button is
selected.
Press the activated button to deselect it.
• Holding down the “Asgn” button and pressing the Low, LoMid, HiMid
and High EQ buttons switches the corresponding EQ band “On” but-
ton status.
• Holding down the “Asgn” button and pressing the Aux1 to Aux4 but-
tons switches the corresponding Effect Send 1-4 “On” button status.