User manual

Changing the sustain pedal controller settings for MIDI recording/
import
You can change your default setting for whether Dorico Elements interprets sustain pedal
controllers as pedal lines when recording MIDI and importing MIDI
les.
NOTE
These options are also available in the MIDI Import Options dialog, and your settings are linked
between this dialog and
Preferences.
PROCEDURE
1. Press Ctrl/Cmd-, (comma) to open Preferences.
2. Click Play in the page list.
3. In the Recording subsection, activate/deactivate Import CC64 as pedal lines.
4. Optional: If you activated Import CC64 as pedal lines, activate/deactivate Snap pedal lines
to previous beat.
5. Click Apply, then Close.
RESULT
When Import CC64 as pedal lines is activated, the MIDI controller CC64 is interpreted as pedal
lines.
When Snap pedal lines to previous beat is activated, the start of pedal lines is automatically
moved back to the start of the beat.
RELATED LINKS
MIDI Import Options dialog on page 78
Disabling MIDI input devices
By default, Dorico Elements accepts MIDI input from all connected MIDI devices, including virtual
MIDI cables and inter-application buses. You can disable MIDI devices individually, for example, if
you are using devices that continuously output MIDI data or if you want particular devices to
remain routed exclusively to another application.
PROCEDURE
1. Press Ctrl/Cmd-, (comma) to open Preferences.
2. Click Play in the page list.
3. In the Recording subsection, click MIDI Input Devices.
4. In the MIDI Input Devices dialog, deactivate the checkbox for each MIDI input device you
want to disable.
5. Click OK to save your changes and close the dialog.
6. Click Apply, then Close.
Write mode
MIDI recording
200
Dorico Elements 3.1.10