User manual

Table Of Contents

RESULT

The positions of the selected instruments and/or slash voices within the kit is changed. Multiple

instruments can share the same staff position, but we recommend that they use different

noteheads so that the player can tell them apart.

RELATED LINKS

Moving notes to different instruments in percussion kits on page 871

Changing the size of gaps between lines in percussion grids

You can change the size of gaps between lines in percussion kits using the grid presentation

type.

PROCEDURE

1. In the Players panel, expand the card of the player in whose percussion kit you want to

change the size of gaps in the grid presentation.

2. Click the arrow that appears in the kit instrument label when you hover over it and choose

Edit Percussion Kit to open the Edit Percussion Kit dialog.

3. Click Grid at the top of the dialog.

4. Click the instruments below which you want to change the gap size.

5. Change the value for Gap.

6. Click Apply, then Close.

RESULT

The size of the gaps below the selected instruments is changed.

Removing individual instruments from percussion kits

You can remove individual instruments from percussion kits, for example, if you want to move an

instrument from one percussion kit to another player.

PROCEDURE

1. In the Players panel, expand the card of the player holding the kit from which you want to

remove instruments.

2. Click the arrow that appears in the kit instrument label when you hover over it and choose

Edit Percussion Kit to open the Edit Percussion Kit dialog.

3. Click the instruments you want to remove from the kit.

4. Click Remove Instrument From Kit in the action bar.

5. Click Close.

RESULT

The selected instruments appears as individual instruments belonging to the same player but

separate from the percussion kit.

You can then move the instruments to other players if required.