User manual

Table Of Contents

Inputting string indicators inside the staff

You can show a string indicator inside the staff for each fretted instrument note. Dorico SE

automatically detects a string that each pitch could be played on, but you can also specify the

string manually.

NOTE

● These steps only apply to notes belonging to fretted instruments.

● This only shows string indicators inside the staff in the current layout, but you can copy

property settings to other layouts.

PROCEDURE

1. Select the notes belonging to fretted instruments beside which you want to show string

indicators.

2. In the Properties panel, activate Show in the String Indicators group.

RESULT

String indicators are shown in the staff beside each selected note. Unless you have specied a

string for each note, the string number shown in the string indicators is calculated automatically.

String indicators inside the staff for open strings appear as a bold number zero without a circle

enclosure.

By default, string indicators appear on the left of noteheads without left-hand ngerings and on

the right of noteheads with left-hand ngerings.

AFTER COMPLETING THIS TASK

● You can specify the string on which notes are played, which affects the number shown in

their corresponding string indicators.

● You can change the notehead-relative position of string indicators.

● You can copy property settings for the selected notes to show string indicators in all

applicable layouts.