User manual

Table Of Contents

● To input single dynamic points, or dynamic event regions containing multiple dynamic

points at regular intervals, select Draw by pressing D or clicking Draw in the Play

toolbox.

● To input gradual dynamic events, select Line by clicking Line in the Play toolbox.

2. Input dynamic points in one of the following ways:

● To input single dynamic points, click in the dynamics lane at each position where you

want a dynamic point.

●

To input a dynamic event region containing multiple dynamic points at regular intervals,

click and drag in a single motion in the dynamics lane.

●

To input gradual dynamic events, click and drag in the dynamics lane from where you

want the gradual dynamics event to start to where you want it to end.

RESULT

Dynamic points are input. If you used the Draw tool, separate dynamic points are input at each

position you clicked. If you clicked and dragged in a single motion using the Draw tool, dynamic

points are input at sixteenth note intervals, or at smaller intervals if the rhythmic grid resolution

ner than sixteenth notes. If you used the Line tool, two dynamic points are input, one at each

end of the range.

By default, dynamic points input using the Draw tool are constant while gradual dynamic events

have a linear point at the start and a constant point at the end.

Gradual dynamic events and dynamic event regions appear with highlighted regions in the

dynamics lane.

Dynamic points input in dynamics lanes affect playback but are not shown in layouts.

NOTE

Inputting dynamic points/events at the positions of dynamics input in Write mode overrides

default playback adjustments for those dynamics. Single dynamic points only override the

dynamic level. Dynamic event regions also override, for example, humanization and increased

dynamics for notes with accents. However, the dynamic curve setting still applies to dynamic

event regions.