User manual

Table Of Contents
NOTE
You can only copy and paste dynamic points in a single dynamics lane at a time.
3. Copy the selected dynamic points in any of the following ways:
Press Ctrl/Cmd-C .
Choose Edit > Copy. You can also choose this option from the context menu.
4. Move the playhead to the position to which you want to paste the selected dynamic points.
5. Paste the selected dynamic points in any of the following ways:
Select the header of the dynamics lane into which you want to paste them and press
Ctrl/Cmd-V .
Right-click in the dynamics lane into which you want to paste them and choose Paste
from the context menu.
RESULT
The selected dynamic points are copied to the selected positions and dynamics lanes without
deleting them from their original positions.
NOTE
All the points of dynamics input in Write mode are copied, even if you only selected a single
point.
You can also repeat selections of two or more dynamic points immediately after themselves
by pressing
R . Each repetition starts at the same position as the last point in the previous
repetition. However, you cannot repeat single dynamic points or the points of immediate,
combined, or force dynamics input in Write mode.
RELATED LINKS
Moving the playhead on page 411
Copying dynamics on page 564
Moving dynamic points
You can move individual dynamic points, including moving them upwards and downwards to
change their values and therefore their dynamic level. For example, if you want to adjust the
volume of
specic existing dynamics.
PREREQUISITE
The dynamics lane is shown for each instrument whose dynamic points you want to move.
PROCEDURE
1. Press S to select Object Selection.
2. Select the dynamic points you want to move in one of the following ways:
Click a single dynamic point.
Make a marquee selection around multiple dynamic points.
NOTE
To move dynamics input in Write mode rhythmically, select only their start point,
including for gradual dynamics and combined/force dynamics that have multiple points.
We recommend only moving one dynamic rhythmically at a time.
We recommend that you select either only points of dynamics input in Write mode or
only points input in the dynamics lane.
Play mode
Tracks
389
Dorico SE 3.1.10