User manual

Table Of Contents

Instrument tracks on page 382

Dynamics lanes on page 384

Automation lanes on page 394

Playing techniques lanes on page 400

Piano roll editor on page 375

Assigning instruments/voices to endpoints on page 438

Muting/Soloing tracks

You can mute/solo individual tracks. This allows you to set xed groups to sound in playback, for

example, if you only want to listen to certain groups of players at a time.

PROCEDURE

1. In the toolbar, click Show Mixer to show the Mixer.

2. In the Mixer, click the appropriate button at the top of each channel you want to mute/solo.

●

Mute

● Solo

RESULT

Each track is muted/soloed and the corresponding buttons are enabled.

This affects which tracks play back until you change which tracks are muted/soloed, meaning you

do not have to reselect the tracks you want to hear each time. For example, if you have eight

tracks and solo four, only those four are played back. If you mute two tracks, those tracks are not

played back but the other six are played back.

NOTE

● Soloing tracks automatically mutes all other tracks. If you solo a track that was muted, it is

automatically unmuted.

● You can also play back only certain tracks/staves by selecting notes/items on each track/staff

you want to hear.

EXAMPLE

Mute

when enabled Solo when enabled