User manual

2. In the Print Options panel, enter the number of copies you want into the Copies eld in the
Destination section.
NOTE
●
Changing the Copies value changes the number of copies for all currently selected
layouts. However, you can change the number of copies for layouts individually. For
example, you can select a full score layout and set it to print 3 copies and leave the part
layouts to print only 1 copy. You can then select all layouts to print them together and
the previously set values are followed.
●
The Copies eld appears blank when you have selected layouts with different values.
3. Activate/Deactivate Collate copies.
4. In the Destination section, choose Printer and select a printer from the menu.
5. In the Job Type section, select the page arrangement you want from the menu.
6. Optional: If you only want to print a specied range of pages, choose Page Range in the Job
Type section.
7. Optional: If you selected Page Range, enter the pages you want into the value eld.
●
To specify a range, enter the rst page and last page separated with a dash, such as 1-4.
●
To specify individual pages or separate ranges, enter each page/range separated with
commas, such as 1,3,5-8.
8. In the Page Setup section, select a paper size from the menu.
9. Choose the paper orientation you want.
10. Optional: If you selected Spreads or 2-up for the job type, activate/deactivate Print odd nal
page on to specify the paper size on which you want to print nal pages for layouts with odd
numbers of pages.
11. Select a paper size and paper orientation for the odd nal page.
12. Choose one of the following size options:
● Fit to Paper
● Custom Scale
13. Optional: If you selected Custom Scale, enter the scale factor you want into the Scale factor
eld.
14. In the Duplex Printing section, select one of the printing options from the Print on menu.
15. Optional: If you selected a duplex printing option, use the bottom two menus to select how
the printed image is ipped when printing on the reverse side of the paper.
16. In the Annotations section, activate each annotation you want to add to the selected
layouts.
17. Click Print.
RESULT
The selected layouts are printed according to the print settings you have applied.
If your selection included part layouts set to concert pitch, Dorico SE shows a warning and offers
to switch them all to transposed pitch before printing/exporting. You can also select which
layouts you want to switch to transposed pitch or proceed anyway with no changes.
TIP
●
You can select individual layouts and set up their printing options without printing straight
away. Once you have set up the printing options you want for multiple layouts, you can then
select all the layouts you want to print and click Print. Your existing print settings are
applied, even if your selection contains layouts with different print settings.
Print mode
Printing layouts
464
Dorico SE 3.1.10