User manual

Table Of Contents
However, if you print the full score as a booklet, you can simply fold the printed pages in the
middle.
Booklet printing settings reorder pages so that they appear in the correct order on the printed
page. For example, a layout containing four pages printed as a booklet is laid out as follows:
First side: page four on the left, page one on the right
Reverse side: page two on the left, page three on the right
If the layout you are printing as a booklet contains an odd number of pages, Dorico SE
automatically places any empty last pages at the end of the booklet. This follows the convention
of showing odd-numbered pages on the right. For example, if you print a layout containing six
pages as a booklet, a total of eight pages are printed with the last two pages in the booklet left
blank. If you want the empty pages to be positioned differently, you can add extra pages to the
layout, for example, a title page.
NOTE
You can only print booklets using the complete range of pages. You cannot dene any page
ranges.
If the order of inward pages is incorrect when you are printing booklets using manual
duplexing, you can activate Reverse order of outward pages in the Duplex Printing section
of the Print Options panel, which instructs
Dorico SE to output the rst set of pages in the
opposite order.
RELATED LINKS
Printing layouts on page 463
Duplex printing on page 473
Duplex printing
Dorico SE allows duplex printing, which means that you can print on both sides of each sheet of
paper.
If your printer supports automatic duplex printing, you can use this function in Dorico SE. If your
printer can only print on one side of each sheet of paper, there is a manual duplex printing
option.
The Print on menu in the Duplex Printing section of the Print Options panel contains the
following options:
One side only
Prints on one side of each sheet of paper.
Both sides manually
Prints on both sides of each sheet of paper. Use this option if you printer lacks an
automatic duplex printing function. After all outward pages have been sent to the
printer, a message box informs you to turn over the stack of printed pages and put
them back into the printer. Click OK to continue printing the inward pages.
Both sides automatically
Prints on both sides of each sheet of paper automatically. This option is only available if
your printer supports this type of printing.
The other menus in the Duplex Printing section allow you to set how the printed image is
ipped when printing on the reverse side of the paper.
Flip image (portrait)
Print mode
Duplex printing
473
Dorico SE 3.1.10