User manual

Force and stress articulations outside the ends of the
slur
Duration articulations inside the ends of the slur
Changing the positions of articulations on tie chains
You can change where in tie chains articulations appear individually. By default, articulations of
force and stress are shown on the rst note/chord in tie chains, while articulations of duration
are shown on the last note/chord.
PROCEDURE
1. Select the tied notes/chords whose articulation position you want to change.
2. In the Articulations group of the Properties panel, activate Pos. in tie chain under the
corresponding heading for the articulation whose position you want to change.
For example, activate Pos. in tie chain under the Articulations of force heading to change
the position of accents.
3. Choose one of the following options:
● First note
● Last note
RESULT
The position of articulations in the selected tie chains is changed.
Changing the placement of articulations individually
You can change whether individual articulations are placed on the notehead side or stem side of
notes.
PROCEDURE
1. Select the notes/chords whose articulation placement you want to change.
2. In the Articulations group of the Properties panel, activate Placement under the
corresponding heading for the articulations whose placement you want to change.
For example, activate Placement under the Articulations of force heading to change the
placement of accents.
3. Select one of the following options from the menu:
●
Notehead side
●
Stem side
RESULT
The articulation is placed on the selected side of the notes or chords. If this creates a collision
with other markings, such as playing techniques, Dorico SE automatically makes adjustments to
make sure all markings are clear and legible.
Articulations
Positions of articulations
489
Dorico SE 3.1.10