User manual

Table Of Contents
Copying dynamics
You can copy dynamics to other rhythmic positions after they have been input. You can select
dynamics on a single staff to copy to another single staff, or you can select dynamics across
multiple staves to copy across the same number of staves.
PROCEDURE
1. In Write mode, select the dynamics you want to copy.
TIP
If you want to copy many dynamics or, for example, just gradual dynamics, you can use a
lter.
2. Press Ctrl/Cmd-C to copy the dynamics.
3. Select the notehead at the rhythmic position to which you want to copy the dynamics.
4. Press Ctrl/Cmd-V to paste the dynamics.
RESULT
The selected dynamics are pasted to new rhythmic positions. If you copied dynamics to other
staves at the same rhythmic position as the original dynamics, the dynamics on all staves are
automatically linked.
If you selected multiple dynamics at different rhythmic positions, their new positions reect their
original rhythmic spacing.
TIP
You can also copy dynamics without adding them to your clipboard by selecting them and
Alt/Opt -clicking each notehead to which you want to copy the selected dynamics.
If you want to copy dynamic phrases immediately after where they were originally input, you
can select them and press R . If you select a single immediate dynamic, it is copied to the
same position.
RELATED LINKS
Linked dynamics on page 575
Filters on page 308
Deleting dynamics
You can delete dynamics from your project. If you delete some but not all dynamics from a group
that is linked to dynamics on other staves, all equivalent linked dynamics are also deleted.
PROCEDURE
1. In Write mode, select the dynamics you want to delete.
2. Press Backspace or Delete .
RESULT
The selected dynamics are deleted. If you delete immediate dynamics immediately before/after
hairpins, the length of hairpins can adjust automatically, depending on the context.
NOTE
Deleting dynamics that are linked to other staves can cause the selected dynamics to be deleted
from all linked staves as well. If you do not select and delete all dynamics in the group, the
Dynamics
Copying dynamics
564
Dorico SE 3.1.10