User manual

RELATED LINKS
Ornaments popover on page 252
Changing existing items on page 310
Changing glissando line text
Glissando lines can be shown with text or without text. You can change the text of glissando lines
individually.
PROCEDURE
1. Select the glissando lines whose text you want to change.
2. In the Properties panel, activate Glissando text in the Glissando Lines group.
3. Select one of the following options from the menu:
●
Gliss.
●
Port.
● No text
RESULT
The text shown on the selected glissando lines is changed.
Changing when glissando line text is shown
By default, glissando text is not shown when glissando lines are too short to accommodate the
text. You can choose to show text on individual glissando lines always, or only if there is sucient
space.
PROCEDURE
1. Select the glissando lines whose setting for when text is shown you want to change.
2. In the Properties panel, activate Glissando text shown in the Glissando Lines group.
3. Choose one of the following options:
●
Show if sucient space
●
Always show
RESULT
If Show if sucient space is chosen, glissando line text is not shown if the glissando line is too
short.
If Always show is chosen, glissando line text is always shown, even if the glissando line is short.
However, this can cause the glissando line text to collide with other items, such as noteheads and
stems.
TIP
You can increase the default gaps between noteheads by changing the default note spacing.
Glissando lines
Changing glissando line text
675
Dorico SE 3.1.10