Operation Manual

Table Of Contents
Using the Instrument in an AU-Compatible Application
The AU version of Groove Agent is installed in your AU plug-ins folder and lets Groove Agent
work in an AU environment without any performance loss or incompatibilities.
For example, to load Groove Agent as an AU instrument for Logic Pro, proceed as follows:
PROCEDURE
1. Open the Track Mixer and select the instrument channel that you want to use.
2. Click in the I/O ī “eld and select AU Instruments > Steinberg > Groove Agent.
3. Select one of the available channel conī “gurations.
Using the Instrument in an AAX-Compatible Application
The AAX version of Groove Agent is installed in your AAX plug-ins folder and makes Groove Agent
available as AAX instrument in ProTools.
PROCEDURE
1. To use Groove Agent as stereo multichannel plug-in, open the Track menu, and select New >
Stereo > Instrument Track.
2. On the instrument track, click Inserts and select Groove Agent from the multichannel plug-
in > Instrument submenus.
Using the Instrument as Standalone Application
Groove Agent can be used as a standalone application, independently of any host application. In
this case, you can connect the instrument directly to your audio hardware.
RELATED LINKS
Using the Standalone Version of the Plug-in on page 199
Introduction
Setting Up
6
Groove Agent 5.0.30