Dorico-Hilfe
Daniel Spreadbury Cristina Bachmann, Heiko Bischoff, Christina Kaboth, Insa Mingers, Matthias Obrecht, Sabine Pfeifer, Benjamin Schütte, Marita Sladek Übersetzung: Boris Rogowski Diese PDF wurde für die Verwendung von Screenreader-Software optimiert. Beachten Sie, dass es aufgrund der Komplexität und großen Anzahl von Bildern in diesem Dokument nicht möglich ist, alternative Bildbeschreibungen einzufügen.
Inhaltsverzeichnis 4 4 5 9 Einleitung Plattformunabhängige Dokumentation Typografische Konventionen So können Sie uns erreichen 10 10 17 21 Erste Schritte Orientierung Ein neues Projekt beginnen Noten schreiben 26 26 27 Dorico-Konzepte Design-Philosophie Wichtige musikalische Konzepte 31 31 34 45 Benutzeroberfläche Hub Fenster Ihre Arbeitsumgebung einrichten 55 55 61 66 67 68 71 73 Einrichtungsmodus Projektfenster im Einrichtungsmodus Spieler Ensembles Instrumente Gruppen Partien Layouts 78 78 83
Einleitung Danke, dass Sie Dorico gekauft haben. Wir freuen uns, dass Sie sich für die neue Notationsanwendung von Steinberg entschieden haben, und hoffen, dass Sie Ihnen viele Jahre lang erstklassige Dienste leisten wird. Dorico ist eine wegweisende Anwendung für die Erstellung ansprechender Partituren, die sich gleichermaßen für Komponisten, Arrangeure, Notensetzer, Verleger, Instrumentalisten, Lehrer, Dozenten und Studenten eignet.
Einleitung Typografische Konventionen Typografische Konventionen In unserer Dokumentation verwenden wir typografische und Markup-Elemente, um Informationen zu strukturieren. Typographische Elemente Die folgenden typographischen Elemente weisen auf die folgenden Zwecke hin. VORAUSSETZUNGEN Weist Sie darauf hin, dass Sie eine Aktion ausführen oder eine Bedingung erfüllen müssen, bevor Sie mit einem Vorgang beginnen können.
Einleitung Typografische Konventionen BEISPIEL Wählen Sie Notensatz > Notensatz-Optionen. Dateinamen und Ordnerpfade werden durch Verwendung der Courier-Schrift gekennzeichnet. Tastaturbefehle Bei vielen Standardtastaturbefehlen, auch Tastaturkürzel genannt, werden Sondertasten verwendet, von denen einige je nach Betriebssystem abweichen können. Der Standard-Tastaturbefehl für Rückgängig ist z. B. [Strg]-Taste-Z unter Windows und [Befehlstaste]-Z unter Mac OS.
Einleitung Typografische Konventionen Das Fenster Dorico Tastaturbefehle wird in einem Webbrowser geöffnet. Sie haben die folgenden Optionen: • Wählen Sie einen Kontext aus, um die verfügbaren Tastaturbefehle anzuzeigen. Der Kontext eines Tastaturbefehls gibt den Modus an, in dem er verwendet werden kann. Tastaturbefehle mit globalem Kontext funktionieren in allen Modi.
Einleitung Typografische Konventionen VORGEHENSWEISE 1. Wählen Sie Bearbeiten > Programmeinstellungen. 2. Wählen Sie im Abschnitt Tastaturbefehle aus dem Tastatursprache-Einblendmenü die gewünschte Tastaturbelegung. 3. Klicken Sie auf Anwenden. ERGEBNIS Sie können die verfügbaren Tastaturbefehle für Ihre Sprache sofort verwenden. Tastaturbefehle zuweisen Sie können Funktionen in Dorico, die noch keinen Tastaturbefehl haben, einen benutzerdefinierten Tastaturbefehl zuweisen.
Einleitung So können Sie uns erreichen 3. Klicken Sie auf Tastaturbefehl entfernen. 4. Klicken Sie auf Anwenden. ERGEBNIS Der Tastaturbefehl wird von der ausgewählten Funktion entfernt. WEITERFÜHRENDE LINKS Nach Tastaturbefehlen von Funktionen suchen auf Seite 7 Tastaturbefehle zurücksetzen auf Seite 9 Tastaturbefehle zurücksetzen Sie können alle Tastaturbefehle auf ihre Standardeinstellungen zurücksetzen. VORGEHENSWEISE 1. Wählen Sie Bearbeiten > Programmeinstellungen. 2.
Erste Schritte Dieses Kapitel hilft Ihnen bei den ersten Schritten in Dorico. Wenn Sie Dorico zum ersten Mal starten, empfehlen wir Ihnen, eine der Vorlagen zu öffnen, um einen Blick auf die Benutzeroberfläche und die Funktionen von Dorico zu werfen, bevor Sie mit Ihren eigenen Projekten beginnen. Sie können diesen Teil auch überspringen und das Programm auf eigene Faust erkunden.
Erste Schritte Orientierung 3. Klicken Sie auf Neu aus Vorlage. ERGEBNIS Die Vorlage wird geöffnet. WEITERE SCHRITTE Fahren Sie mit den nächsten Abschnitten fort, die Ihnen einen kurzen Überblick über die Benutzeroberfläche bieten und Sie mit den wichtigsten Funktionen des Programms vertraut machen.
Erste Schritte Orientierung Das Projektfenster umfasst die folgenden Bereiche: Werkzeugzeile Die Werkzeugzeile befindet sich am oberen Rand des Projektfensters. Auf der linken Seite der Werkzeugzeile werden die Modi angezeigt. Wenn Sie einen Modus aktivieren, ändern sich die Arbeitsumgebung und die verfügbaren Bereiche. Der aktive Modus wird farblich hervorgehoben.
Erste Schritte Orientierung Im Notenbereich werden die von Ihnen erstellten Partituren oder Einzelstimmen angezeigt. Am oberen Rand des Notenbereichs können Sie mehrere Layouts auf Registerkarten anzeigen und zwischen ihnen wechseln. Layouts in Dorico ermöglichen es Ihnen, unterschiedliche Darstellungen Ihrer Noten anzuzeigen.
Erste Schritte Orientierung Seite enthält Werkzeuge, mit denen Sie andere Notationselemente wie Schlüssel, Tonarten, Taktarten usw. erstellen und bearbeiten können. Bereiche Dorico bietet in allen Modi Bereiche mit unterschiedlichen Funktionen. Wenn Sie die Vorlage öffnen, sehen Sie einen Bereich auf der linken Seite des Notenbereichs. Dies ist das Notenfeld im Schreiben-Modus. Notenfeld im Schreiben-Modus.
Erste Schritte Orientierung Schreibmodus Im Schreiben-Modus können Sie Ihre Noten eingeben. Die verfügbaren Werkzeugfelder und Bereiche ermöglichen Ihnen die Eingabe aller gängigen Noten und Notationselemente. Notensatzmodus Im Notensatz-Modus können Sie Feinabstimmungen an den Noten vornehmen, die Sie im Schreiben-Modus eingegeben haben, und das Layout der Seiten in Ihrem Projekt festlegen.
Erste Schritte Orientierung Eine neue Registerkarte öffnen Sie können eine neue Registerkarte öffnen, um eine andere Ansicht oder ein anderes Layout innerhalb desselben Projektfensters anzuzeigen. Jede Registerkarte kann ein separates Layout oder eine zusätzliche Ansicht eines Layouts enthalten, das bereits auf einer anderen Registerkarte oder in einem anderen Fenster geöffnet ist.
Erste Schritte Ein neues Projekt beginnen VORGEHENSWEISE • Führen Sie einen der folgenden Schritte aus: • Drücken Sie [Strg]-Taste/[Befehlstaste]-[Umschalttaste]-T. • Wählen Sie Fenster > Neues Fenster. ERGEBNIS Ein Duplikat des aktiven Fensters wird geöffnet. Es enthält dieselben Registerkarten und dieselben Ansichtsoptionen wie das ursprüngliche Fenster.
Erste Schritte Ein neues Projekt beginnen Wenn Sie ein neues Projekt beginnen, ohne eine bestimmte Projektvorlage auszuwählen, wird der Einrichtung-Modus aktiviert. Hier können Sie Spieler festlegen und ihnen Instrumente zuweisen. Im Startbereich in der Mitte des Fensters können Sie verschiedene Arten von Spielern für Ihr Projekt auswählen. Später, nachdem Sie Spieler hinzugefügt haben, wird dieser Bereich zum Notenbereich. Rechts im Layouts-Bereich wird ein Eintrag für eine Gesamtpartitur angezeigt.
Erste Schritte Ein neues Projekt beginnen Daraufhin wird dem Spieler-Bereich ein Spieler ohne Instrument hinzugefügt. 2. Wählen Sie ein Instrument aus dem Einblendmenü. HINWEIS Wählen Sie für dieses Beispiel einen Pianisten aus. TIPP 3. • Sie können das Suchfeld im Einblendmenü verwenden, indem Sie dort den Namen des gewünschten Instruments eingeben. Schon während Sie schreiben, wird die Liste gefiltert.
Erste Schritte Ein neues Projekt beginnen Jedes Projekt enthält mindestens eine Partie, und standardmäßig enthält jedes Layout die Noten aus allen Partien in Ihrem Projekt. Wenn Sie in Dorico eine Partie erstellen, passiert Folgendes: VORGEHENSWEISE • Klicken Sie im Partien-Bereich auf Partie hinzufügen . ERGEBNIS Alle vorhandenen Spieler werden der neuen Partie zugewiesen. Die neue Partie wird automatisch allen vorhandenen Gesamtpartitur- und Einzelstimmen-Layouts hinzugefügt.
Erste Schritte Noten schreiben WEITERFÜHRENDE LINKS Layouts erstellen auf Seite 73 Noten schreiben Nachdem Sie Ihr Projekt eingerichtet haben, können Sie mit dem Schreiben von Noten beginnen. Im Schreiben-Modus können Sie Noten und andere Notationselemente in Ihre Partitur eingeben. TIPP In Dorico lassen sich die meisten Schritte allein mit einer Computertastatur ausführen. Sie brauchen weder eine Maus noch ein Touchpad. Am effizientesten können Sie Dorico anhand von Tastaturbefehlen bedienen.
Erste Schritte Noten schreiben • Doppelklicken Sie auf die Pause. Die Eingabemarke wird angezeigt. 3. Wählen Sie einen der Notenwerte im Notenfeld aus. HINWEIS Standardmäßig wählt Dorico eine Viertelnote für Sie aus. 4. Spielen Sie Noten auf Ihrem MIDI-Keyboard oder drücken Sie die Tasten A, B, C, D, E, F, G auf der Computertastatur, um die entsprechenden Tonhöhen einzugeben.
Erste Schritte Noten schreiben VORGEHENSWEISE 1. Wählen Sie die erste Note in der Notenzeile aus. 2. Drücken Sie [Umschalttaste]-M. Über der Notenzeile wird ein kleines Einblendfeld geöffnet. 3. Geben Sie eine typische Taktart ein, z. B. 3/4. 4. Drücken Sie die [Enter]-Taste. ERGEBNIS Die Taktart wird automatisch links von der Note angezeigt, und die erforderlichen Taktstriche werden an den korrekten Positionen eingefügt.
Erste Schritte Noten schreiben 4. Drücken Sie die [Enter]-Taste. ERGEBNIS Die Tonart wird zwischen dem Schlüssel und der Taktart eingegeben. Dorico fügt ggf. automatisch Vorzeichen hinzu. Ihren ersten Akkord eingeben In diesem Abschnitt erfahren Sie, wie Sie im Akkordmodus einen Akkord über die Computertastatur eingeben können. Wenn Sie stattdessen ein MIDI-Keyboard verwenden möchten, können Sie den Akkord auch damit eingeben: In diesem Fall müssen Sie den Akkordmodus nicht aktivieren.
Erste Schritte Noten schreiben 3. Geben Sie die gewünschten Noten für den Akkord ein, indem Sie nacheinander die jeweiligen Tasten von A bis G drücken. Um einen C-Dur-Akkord einzugeben, drücken Sie z. B. C, E und G. Standardmäßig fügt Dorico jede neue Note in der Oktave über der zuvor eingegebenen Note ein. Sie können die Oktave ändern, indem Sie den jeweiligen Tastaturbefehl eingeben. Das folgende Beispiel zeigt ein mögliches Ergebnis: 4.
Dorico-Konzepte Die folgenden Abschnitte geben Ihnen einen Überblick über die Design-Philosophie und die Konzepte, auf denen Dorico basiert. Wir empfehlen Ihnen, sich mit diesen Konzepten vertraut zu machen, da im Laufe der Dokumentation häufig auf sie eingegangen wird. Design-Philosophie Wenn Sie bereits Erfahrung mit anderen Notationsanwendungen haben und gern Näheres über Designüberlegungen für Notationsprogramme erfahren möchten, könnte Sie die folgende Diskussion interessieren.
Dorico-Konzepte Wichtige musikalische Konzepte mehrere Instrumente spielen. Spieler können entweder einzelne Personen sein, die auch mehr als ein Instrument spielen können (z. B. ein Oboist, der außerdem Englischhorn spielt), oder Gruppen, in denen jeder nur ein Instrument spielt (z. B. acht Violinspieler). Die eigentlichen Noten, die von der Gruppe in Ihrer Partitur gespielt werden, gehören einer oder mehreren Partien an. Eine Partie ist ein eigenständiger Abschnitt von Noten, z. B.
Dorico-Konzepte Wichtige musikalische Konzepte Notensatz In diesem Modus haben Sie Zugriff auf Feinabstimmungen, mit denen Sie jedes Element im Projekt bearbeiten und verändern können. Außerdem können Sie Seiten, Musterseiten, Layouts und Formate verwalten. Wiedergabe In diesem Modus können Sie Ihr Projekt für die Wiedergabe einrichten. Sie können VST-Instrumente zuweisen, den Mix anpassen, Automation anwenden und Notendaten optimieren.
Dorico-Konzepte Wichtige musikalische Konzepte HINWEIS Satzspieler können keine verschiedenen Instrumente übernehmen, aber divisi spielen. Das bedeutet, dass sie in kleinere Einheiten unterteilt werden können, was für Streicher häufig erforderlich ist. Gruppen Eine Gruppe entspricht einer Reihe von Musikern, die als Einheit behandelt werden sollen, z. B. ein Chor, Orchester oder Kammerensemble.
Dorico-Konzepte Wichtige musikalische Konzepte Partien erstellen. Sie können die Layouts verwenden, um paginierte Noten zu erstellen, die gedruckt oder in verschiedenen Formaten exportiert werden können. Ein typisches Projekt für ein Ensemble aus mehreren Spielern enthält mehrere Layouts. Ein Streichquartett in drei Sätzen enthält z. B. vier einzelne Spieler – zwei Violinen, eine Viola und ein Cello – sowie drei Partien, eine für jeden Satz.
Benutzeroberfläche Die Benutzeroberfläche von Dorico ist so gestaltet, dass sie möglichst wenig ablenkt, aber dennoch sofortigen Zugriff auf alle wichtigen Werkzeuge bietet. Sie können die Benutzeroberfläche ausprobieren, ohne Schaden an Ihrem Projekt anzurichten. Sie können ungewollte Änderungen jederzeit rückgängig machen oder Ihr Projekt schließen, ohne es zu speichern. Hub Wenn Sie Dorico starten, wird der Hub geöffnet.
Benutzeroberfläche Hub Knowledge Base Leitet Sie zur Knowledge Base auf der Steinberg-Website. Letzte Projekte Zeigt eine Liste der Projekte an, an denen Sie zuletzt gearbeitet haben. Sie können mit der [Pfeil-nach-oben-Taste] und der [Pfeil-nach-unten-Taste] oder mit der Maus durch die Liste scrollen. Orchestral, Band, Kammermusik, Choral und Vokal, Solo Hier können Sie zwischen den verschiedenen Kategorien für Projektvorlagen wählen. Neues leeres Projekt Beginnt ein neues Projekt.
Benutzeroberfläche Hub Neue Projekte aus Projektvorlagen beginnen Dorico bietet mehrere Projektvorlagen, die Sie verwenden können, um ein neues Projekt zu beginnen. VORGEHENSWEISE 1. Wählen Sie im Hub eine der Projektvorlagen-Kategorien: • Orchestral • Band • Kammermusik • Choral und Vokal • Solo 2. Wählen Sie eine der aufgelisteten Projektvorlagen aus der gewählten Kategorie aus. 3. Klicken Sie auf Neu aus Vorlage. ERGEBNIS Die Projektvorlage wird in einem neuen Fenster geöffnet.
Benutzeroberfläche Fenster VORGEHENSWEISE 1. Klicken Sie auf Anderes öffnen. HINWEIS Alternativ können Sie auch Datei > Öffnen wählen. 2. Suchen Sie im angezeigten Dialog nach der Datei, die Sie öffnen möchten. TIPP Um mehrere Dateien gleichzeitig zu öffnen, drücken Sie die [Strg]-Taste/ [Befehlstaste] und wählen Sie die gewünschten Dateien aus oder drücken Sie die [Umschalttaste] und wählen Sie einen Bereich von Dateien aus. 3. Klicken Sie auf Öffnen.
Benutzeroberfläche Fenster Gibt Ihnen Zugriff auf die Modi, die Optionen der Arbeitsumgebung, den Mixer und die grundlegenden Transportoptionen. 2. Registerkartenzeile Zeigt in den Modi Einrichtung, Schreiben und Notensatz die geöffneten Registerkarten an. Wenn Sie den Notenbereich trennen und mehrere Registerkarten öffnen, werden Registerkartengruppen angezeigt. 3.
Benutzeroberfläche Fenster Die Werkzeugzeile ist immer verfügbar, unabhängig vom verwendeten Modus oder Werkzeug. Wenn Sie die Werkzeugzeile aus einem bestimmten Grund ausblenden müssen, können Sie auf den Ein-/Ausblenden-Pfeil an ihrem oberen Rand klicken. Die Werkzeugzeile besteht aus den folgenden Elementen: 1. Modi Auswählbare Arbeitsumgebungen im Projektfenster, die in unterschiedlichen Phasen der Erstellung einer Partitur verwendet werden. 2.
Benutzeroberfläche Fenster Öffnet das Transport-Fenster. Zeitanzeige Zeigt die Position der Abspielmarke in der Partitur an. Die Einheiten der Zeitanzeige werden in der folgenden Reihenfolge angezeigt: Takte, Zählzeiten, Sechzehntelnoten, 120stel einer Sechzehntelnote. Zurückspulen an Anfang Setzt die Abspielmarke an den Anfang Ihrer Partitur. Wiedergabe Startet/Stoppt die Wiedergabe. Projekt aktivieren Zeigt an, welches Projekt für die Wiedergabe aktiviert ist.
Benutzeroberfläche Fenster Im Projekt-Startbereich werden Karten angezeigt, mit denen Sie Ihre ersten Spieler hinzufügen können. Um Spieler hinzuzufügen, klicken Sie eine der Karten an: Solospieler hinzufügen Fügt einen einzelnen Spieler hinzu, dem Sie ein oder mehrere Instrumente zuweisen können. Satzspieler hinzufügen Fügt einen Spieler hinzu, der für mehrere Spieler steht, die alle dasselbe Instrument spielen. Ensemble hinzufügen Fügt mehrere Spieler hinzu, die unterschiedliche Instrumente spielen.
Benutzeroberfläche Fenster Notenbereich mit einer Beispielpartitur Der Notenbereich kann in verschiedenen Ansichten angezeigt werden. Die Registerkartenleiste des Notenbereichs ermöglicht es Ihnen, verschiedene Layouts aus Ihrem Projekt zu öffnen und zwischen ihnen zu wechseln. Die Scrollleisten am rechten und unteren Rand des Notenbereichs ermöglichen Ihnen das Scrollen im Layout.
Benutzeroberfläche Fenster Druckvorschaubereich, der eine Partitur als Booklet anzeigt Im Druckvorschaubereich können Sie durch die angezeigten Seiten scrollen, aber keine Änderungen an Ihren Layouts vornehmen. Wenn Sie etwas ändern wollen, müssen sie in den Einrichtung-, Schreiben- oder Notensatz-Modus wechseln. Wenn Sie mehrere Layouts auswählen, um sie innerhalb eines Druckauftrags zu drucken, zeigt der Druckvorschaubereich nur das erste Layout an.
Benutzeroberfläche Fenster Notenfeld (links), Notationsfeld (rechts) und Eigenschaften-Bereich (unten) im Schreiben-Modus. Jeder Modus in Dorico hat seine eigenen Bereiche.
Benutzeroberfläche Fenster Werkzeugfelder Werkzeugfelder stehen im Schreiben-Modus zur Verfügung. Sie bieten Ihnen Werkzeuge, mit denen Sie Noten und Notationselemente eingeben und bearbeiten können. Außerdem können Sie mit Ihnen festlegen, welche Notationselemente im Notationsfeld angezeigt werden.
Benutzeroberfläche Fenster Seitenanordnungen für die Seitenansicht auf Seite 44 Zoom-Optionen auf Seite 45 Auswahlwerkzeuge Dorico ermöglicht Ihnen die Wahl eines Auswahlwerkzeugs, mit dem Sie Elemente im Notenbereich auswählen oder verschieben können. Wenn Sie die [Umschalttaste] in Kombination mit dem ausgewählten Auswahlwerkzeug drücken, können Sie umgehend das andere Werkzeug verwenden.
Benutzeroberfläche Fenster 3. Verschieben Sie die Ansicht. 4. Lassen Sie die Maustaste los. Ansichtstypen Dorico bietet verschiedene Möglichkeiten zur Anzeige Ihrer Layouts. Dorico speichert den von Ihnen gewählten Ansichtstyp für jedes Layout, so dass Sie ihn nur einmal festlegen müssen. Sie können die Standard-Ansichtstypen für neue Projekte in den Programmeinstellungen ändern. Die folgenden Ansichtstypen sind verfügbar: Fortlaufende Ansicht Zeigt Ihre Musik in einem einzigen fortlaufenden System an.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten Doppelseiten vertikal Zeigt Seiten als Doppelseiten an, wobei jedes Seitenpaar von oben nach unten in einer Spalte dargestellt wird. Einzelseiten horizontal Zeigt Einzelseiten von links nach rechts an. Einzelseiten vertikal Zeigt Einzelseiten von oben nach unten an. Zoom-Optionen Sie können die Größe von Noten und Notationselementen im Notenbereich ändern. Verkleinern Verkleinert Noten und Notationselemente im Notenbereich.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten VORGEHENSWEISE 1. Führen Sie einen der folgenden Schritte aus: • Drücken Sie [Strg]-Taste/[Befehlstaste]-T. • Klicken Sie rechts neben den Registerkarten auf Neue Registerkarte • Wählen Sie Fenster > Neue Registerkarte. . Es wird eine neue Registerkarte mit verschiedenen Symbolen am oberen und einer Liste von Layouts am unteren Rand geöffnet. 2. Führen Sie einen der folgenden Schritte aus: • Klicken Sie auf eines der Symbole.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten • Um eine neue Gruppe zu erstellen, die horizontal von der ursprünglichen Registerkartengruppe getrennt ist und die Layouts übereinander anzeigt, wählen Sie Fenster > Horizontale Trennung. ERGEBNIS Die ausgewählte Registerkarte wird in die neue Registerkartengruppe verschoben.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten VORGEHENSWEISE • Um zwischen Registerkarten zu wechseln, führen Sie einen der folgenden Schritte aus: • Klicken Sie auf die Registerkarte, zu der Sie wechseln möchten. • Drücken Sie [Strg]-Taste/[Befehlstaste]-[Tab]-Taste, um alle geöffneten Registerkarten der Reihe nach anzuwählen. Drücken Sie [Strg]-Taste/ [Befehlstaste]-[Umschalttaste]-[Tab]-Taste, um alle geöffneten Registerkarten in umgekehrter Reihenfolge anzuwählen.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten VORGEHENSWEISE • Führen Sie einen der folgenden Schritte aus: • Um ein neues Fenster innerhalb desselben Projekts zu erstellen und die Registerkarte in dieses Fenster einzufügen, klicken Sie eine Registerkarte an, ziehen Sie sie nach links oder rechts aus der Registerkartenzeile hinaus und lassen Sie die Maustaste los.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten WEITERE SCHRITTE Um zur Standard-Ansicht zurückzukehren, wählen Sie erneut Ansicht > Vollbild. Bereiche ausblenden Um mehr von Ihren Layouts zu sehen, können Sie alle umgebenden Bereiche vollständig aus dem Hauptfenster ausblenden. VORGEHENSWEISE • Führen Sie einen der folgenden Schritte aus: • Klicken Sie in der Werkzeugzeile auf Bereiche ausblenden/wiederherstellen • Wählen Sie Fenster > Bereiche ausblenden/wiederherstellen. .
Benutzeroberfläche Ihre Arbeitsumgebung einrichten 2. 3. Wählen Sie eine der Ansichten aus der Liste.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten Standard-Zoom Hier können Sie den Zoom-Skalierungsfaktor festlegen, den Sie bei Erstellung eines neuen Projekts verwenden möchten. Standardverhalten bei Klicken-Ziehen Hier können Sie das Auswahlwerkzeug wählen, das Sie standardmäßig in Ihren Projekten verwenden möchten. Neue Fenster maximiert öffnen Wenn Sie diese Option aktivieren und ein neues Fenster öffnen, wird das Fenster maximiert, um den gesamten Bildschirm zu füllen.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten HINWEIS Stellen Sie sicher, dass andere Audioanwendungen, die auf die Audiohardware zugreifen, für die Freigabe des Audiotreibers eingerichtet sind. Audiogeräte konfigurieren Öffnet den Dialog Geräte konfigurieren. Tastaturbefehle Die meisten Hauptmenüs in Dorico haben Tastaturbefehle für bestimmte Menüelemente. Außerdem gibt es zahlreiche andere Dorico-Funktionen, die anhand von Tastaturbefehlen ausgeführt werden können.
Benutzeroberfläche Ihre Arbeitsumgebung einrichten Layout-Optionen auf Seite 75 Tastaturbefehle auf Seite 6 54
Einrichtungsmodus Im Einrichtung-Modus können Sie die Spieler und Instrumente für Ihr Projekt festlegen. Sie können außerdem Partien erstellen und verwalten und Layouts einrichten. Projektfenster im Einrichtungsmodus Das Projektfenster im Einrichtung-Modus enthält die Standard-Werkzeugzeile, den Notenbereich und die Statuszeile.
Einrichtungsmodus Projektfenster im Einrichtungsmodus Listet die Layouts auf, die für Spieler erstellt wurden. 3. Partien Zeigt die Partien an, die für Ihr Projekt erstellt wurden. Wenn Sie Elemente in einem Bereich auswählen oder bearbeiten, werden der Bereich und die ausgewählten Elemente farbig hervorgehoben.
Einrichtungsmodus Projektfenster im Einrichtungsmodus 1. Ein-/Ausblenden-Pfeil Erweitert/Minimiert die Spieler-Karte. 2. Spieler-Typ Zeigt an, ob es sich bei dem Spieler um einen Solospieler handelt. 3. oder einen Satzspieler Name des Spielers Zeigt den Namen des Spielers an. Dorico fügt die Namen der zugewiesenen Instrumente automatisch dem Namen des Spielers hinzu. Falls nötig, können Sie den Spieler umbenennen. 4.
Einrichtungsmodus Projektfenster im Einrichtungsmodus Fügt Ihrem Projekt mehrere Spieler hinzu, die für Standardkombinationen von Musikinstrumenten stehen. HINWEIS Wenn Sie ein Ensemble hinzufügen, fügt Dorico dem Layouts-Bereich automatisch Einzelstimmen-Layouts für jeden Spieler im Ensemble hinzu. Gruppe hinzufügen Fügt Ihrem Projekt eine Gruppe hinzu, der Sie alle Arten von Spielern zuweisen können. Spieler löschen Löscht ausgewählte Spieler oder Gruppen aus dem Spieler-Bereich.
Einrichtungsmodus Projektfenster im Einrichtungsmodus Im Layouts-Bereich werden das Standard-Gesamtpartitur-Layout sowie alle Layouts, die Sie für Ihr Projekt erstellt haben, in Form von Karten aufgelistet. Auf jeder Layout-Karte wird Folgendes angezeigt: 1. Ein-/Ausblenden-Pfeil Erweitert/Minimiert die Layout-Karte. 2. Layout-Typ Zeigt an, ob es sich beim Layout um ein Gesamtpartitur-Layout Layout 3. oder ein benutzerdefiniertes Partitur-Layout , ein Einzelstimmen- handelt.
Einrichtungsmodus Projektfenster im Einrichtungsmodus Vollständiges Partitur-Layout hinzufügen Fügt Ihrem Projekt ein Gesamtpartitur-Layout hinzu. Standardmäßig werden alle Spieler und Partien in das Layout aufgenommen. Einzelstimmen-Layout hinzufügen Fügt Ihrem Projekt ein leeres Einzelstimmen-Layout hinzu. Danach können Sie dem Layout einen oder mehrere Spieler hinzufügen. Standardmäßig enthält ein Einzelstimmen-Layout alle Partien, die in Ihrem Projekt enthalten sind.
Einrichtungsmodus Spieler Im Partien-Bereich werden die Standard-Partie sowie alle Partien, die Sie für Ihr Projekt erstellt haben, in Form von Karten angezeigt. Auf jeder Partie-Karte wird Folgendes angezeigt: 1. Name der Partie Zeigt den Namen der Partie an. Wenn Sie mehrere Partien erstellen, ohne sie umzubenennen, wird als Name eine Nummer angezeigt, die für jede neue Partie erhöht wird. Diese Nummer gibt auch die Position der jeweiligen Partie in einem Layout an. 2.
Einrichtungsmodus Spieler Ein Spieler kann ein Solospieler sein, der für einen einzelnen Menschen steht, der ein Instrument oder mehrere Instrumente spielen kann. Ein Klarinettist kann z. B. auch Altsaxophon spielen. Ein Spieler kann außerdem ein Satzspieler sein, der für mehrere Menschen steht, von denen jeder dasselbe Instrument spielt. Dies könnte z. B. eine Violinensektion oder die Stimmlage Sopran in einem Chor sein.
Einrichtungsmodus Spieler ERGEBNIS Der Solospieler wird automatisch nach dem ausgewählten Instrument benannt. WEITERFÜHRENDE LINKS Spieler umbenennen auf Seite 64 Projekt-Startbereich auf Seite 37 Satzspieler hinzufügen VORAUSSETZUNGEN Der Spieler-Bereich muss geöffnet sein. VORGEHENSWEISE 1. Führen Sie einen der folgenden Schritte aus: • Wenn Sie ein neues Projekt begonnen haben, klicken Sie auf Satzspieler hinzufügen im Projekt-Startbereich.
Einrichtungsmodus Spieler VORGEHENSWEISE 1. Klicken Sie mit der rechten Maustaste auf den Spieler. 2. Wählen Sie Spieler duplizieren aus dem Kontextmenü. ERGEBNIS Ein neuer Spieler wird hinzugefügt, dem dasselbe Instrument zugewiesen ist wie dem ursprünglichen Spieler. Der ursprüngliche Spieler und der neue Spieler werden nummeriert, um sicherzustellen, dass sie eindeutige Namen haben.
Einrichtungsmodus Spieler Löscht den Spieler und die Noten, die Sie für die Instrumente erstellt haben, die zu diesem Spieler gehören. • Spieler und Einzelstimmen-Layouts löschen Löscht den Spieler, die Noten sowie alle Einzelstimmen-Layouts, denen der Spieler zugewiesen ist. HINWEIS Einzelstimmen-Layouts können nicht gelöscht werden, wenn sie mehr als den gelöschten Spieler enthalten.
Einrichtungsmodus Ensembles 2. Deaktivieren Sie im Spieler-Bereich das Kontrollkästchen der Spieler-Karte für den Spieler, den Sie ausschließen möchten. ERGEBNIS Der Spieler wird aus der Partie ausgeschlossen. Ensembles Wenn Sie in Dorico ein Ensemble hinzufügen, werden Ihrem Projekt mehrere Spieler gleichzeitig hinzugefügt. Dorico bietet eine Reihe von vordefinierten Ensembles, die Sie nutzen können. Das Hinzufügen von Ensembles ist eine der Möglichkeiten, schnell eine Instrumentierung aufzubauen.
Einrichtungsmodus Instrumente Instrumente Sie können Instrumente Solo- und Satzspielern sowie Ensembles zuweisen. Instrumente werden in der Praxis von Menschen gespielt, und dies wird in Dorico berücksichtigt. Bevor Sie Instrumente zuweisen können, müssen Sie Spieler oder Ensembles hinzufügen, die bei Bedarf wiederum Gruppen zugewiesen werden können.
Einrichtungsmodus Gruppen VORGEHENSWEISE 1. 2. Führen Sie im Spieler-Bereich einen der folgenden Schritte aus: • Wählen Sie den Spieler aus und drücken Sie [Umschalttaste]-I. • Klicken Sie auf das Plus-Zeichen ohne Instrument. • Klicken Sie mit der rechten Maustaste auf den Spieler und wählen Sie Instrument zu Spieler hinzufügen.
Einrichtungsmodus Gruppen »Belshazzar's Feast« mit zwei Blechbläsergruppen, die abseits der Bühne spielen. In derartigen Fällen muss man die Möglichkeit haben, Spieler solchen Gruppen zuzuweisen, um z. B. ihre Notenzeilen in der Dirigentenpartitur korrekt zu verklammern und zu beschriften. Gruppen hinzufügen Sie können Spieler in Gruppen organisieren. VORAUSSETZUNGEN Der Spieler-Bereich muss geöffnet sein. VORGEHENSWEISE 1. Optional: Wählen Sie Spieler aus, die Sie der Gruppe hinzufügen möchten. 2.
Einrichtungsmodus Gruppen 3. Führen Sie einen der folgenden Schritte aus: • Um die Spieler zu behalten, klicken Sie auf Spieler behalten. • Um die Gruppe einschließlich der Spieler zu löschen, klicken Sie auf Spieler löschen. Spieler oder Ensembles zu Gruppen hinzufügen Sie können vorhandene oder neue Spieler zu Ensembles oder Gruppen hinzufügen. VORAUSSETZUNGEN Sie haben mindestens einen Spieler, ein Ensemble oder eine Gruppe hinzugefügt.
Einrichtungsmodus Partien VORGEHENSWEISE 1. Wählen Sie im Spieler-Bereich die Spieler aus, die Sie aus einer Gruppe entfernen möchten. 2. Klicken Sie die ausgewählten Spieler an, ziehen Sie sie aus der Gruppe und lassen Sie die Maustaste los. Partien Partien sind separate Abschnitte von Noten innerhalb Ihres Projekts, z. B. Sätze oder Lieder. Jedes Projekt enthält mindestens eine Partie, und standardmäßig enthält jedes Layout die Noten aus allen Partien in Ihrem Projekt.
Einrichtungsmodus Partien • Doppelklicken Sie auf den Namen der Partie. • Klicken Sie mit der rechten Maustaste auf den Namen der Partie und wählen Sie Umbenennen aus dem Kontextmenü. 2. Geben Sie den neuen Namen ein. 3. Drücken Sie die [Enter]-Taste. Partien löschen Sie können nicht mehr benötigte Partien löschen. WICHTIG Wenn Sie Partien löschen, werden alle Noten für alle Instrumente aller Spieler für die jeweiligen Partien ebenfalls gelöscht. VORGEHENSWEISE 1.
Einrichtungsmodus Layouts 3. Optional: Im Notationsoptionen-Dialog können Sie bei Bedarf Ihre Partieauswahl ändern. Führen Sie einen der folgenden Schritte aus: • Wählen Sie eine oder mehrere Partien aus der Partien-Liste aus. • Klicken Sie auf Alles auswählen. 4. Wählen Sie im Einblendmenü Kategorie auswählen eine Kategorie aus. 5. Nehmen Sie Ihre Änderungen im rechten Bereich vor. 6. Klicken Sie auf Anwenden. Layouts Layouts legen fest, wie die Noten in einer Partie dargestellt werden.
Einrichtungsmodus Layouts WEITERE SCHRITTE Sie können Ihrem Layout Spieler und Partien zuweisen. Layouts umbenennen Sie können den Namen eines Layouts ändern. Wenn Sie Ihrem Projekt ein Einzelstimmen-Layout hinzufügen, lautet dessen Standardname Leere Einzelstimme. Die Standardnamen von Gesamtpartitur-Layouts und benutzerdefinierten Partitur-Layouts lauten Gesamtpartitur und Benutzerdefinierte Partitur. Wenn Sie mehrere Layouts hinzufügen, wird der Standardname um eine aufsteigende Nummer erweitert.
Einrichtungsmodus Layouts VORGEHENSWEISE 1. Klicken Sie auf eine Layout-Karte und halten Sie den Mauszeiger gedrückt. 2. Ziehen Sie die Layout-Karte an eine andere Position im Bereich. 3. Lassen Sie die Maustaste los. ERGEBNIS Das Layout wird an der ausgewählten Position eingefügt. Layouts löschen Sie können Layouts aus der Liste von Layouts im Layouts-Bereich löschen. VORGEHENSWEISE 1. Wählen Sie das Layout aus, das Sie löschen möchten. 2. Führen Sie einen der folgenden Schritte aus: 3.
Einrichtungsmodus Layouts • Um die Layout-Optionen für eine einzelne Einzelstimme festzulegen, wählen Sie im Einrichtung-Modus die Einzelstimme im Layouts-Bereich aus, klicken Sie mit der rechten Maustaste darauf und wählen Sie im Kontextmenü Layout-Optionen. Layout-Optionen Der Dialog Layout-Optionen beinhaltet ein Einblendmenü, in dem Sie eine Kategorie auswählen können. Jede Kategorie umfasst Unterkategorien mit Optionen, die auf der rechten Seite angezeigt werden.
Einrichtungsmodus Layouts Seite einrichten In der Kategorie Seite einrichten der Layout-Optionen können Sie grundlegende Seiteneingenschaften festlegen, die sich auf die Art und Weise der Anordnung der Notation auf einer Seite auswirken. Taktzahlen In der Taktzahlen-Kategorie in den Layout-Optionen können Sie festlegen, wie Taktzahlen in jedem Layout angezeigt und positioniert werden sollen.
Schreibmodus Im Schreiben-Modus können Sie Ihre Noten erstellen. Sie können Noten und Notationselemente in Ihre Partitur einfügen. Projektfenster im Schreibmodus Das Projektfenster im Schreiben-Modus enthält die Standard-Werkzeugzeile, den Notenbereich und die Statuszeile. Es bietet Werkzeugfelder und Bereiche mit den Werkzeugen und Funktionen, die Sie zum Schreiben Ihrer Noten benötigen. Sie haben die folgenden Möglichkeiten, den Schreiben-Modus zu öffnen: • Wählen Sie Schreiben in der Werkzeugzeile.
Schreibmodus Projektfenster im Schreibmodus Enthält die Notenarten, Vorzeichen, Bindebögen und Artikulationen, die bei der Noteneingabe am häufigsten verwendet werden. 3. Eigenschaften-Bereich Bietet Zugriff auf Eigenschaften, die für spezifische Änderungen an der Notation erforderlich sind. 4. Notationsfeld Enthält alle Notationselemente, die Sie für Ihre Noten verwenden können. 5.
Schreibmodus Projektfenster im Schreibmodus Nutzt den Notenwert vorhandener Noten für die Noteneingabe per MIDIKeyboard oder Computertastatur. Dieses Werkzeug hilft Ihnen dabei, die Dauer von Noten beizubehalten, aber ihre Tonhöhen zu ändern. Notenwert erzwingen Erstellt immer den Notenwert, den Sie im Notenfeld eingestellt haben. Sie können Notenwert erzwingen z. B.
Schreibmodus Projektfenster im Schreibmodus Der obere Teil des Notenfelds enthält die Notenwerte, die Sie eingeben können. Nicht alle verfügbaren Notenwerte sind standardmäßig sichtbar. Um alle Notenwerte anzuzeigen, klicken Sie auf Alle Noten anzeigen/ausblenden der Liste mit Notenwerten. / am oberen oder unteren Rand Im mittleren Teil des Notenfelds können Sie Vorzeichen und Bindebögen aktivieren. Am unteren Rand des Notenfelds können Sie Artikulationen aktivieren.
Schreibmodus Projektfenster im Schreibmodus Der Abschnitt für Noten und Pausen des Eigenschaften-Bereichs im Schreibmodus WEITERFÜHRENDE LINKS Die Eigenschaften einzelner Elemente im Schreibmodus ändern auf Seite 107 Notationsfeld Das Notationsfeld enthält die Notationselemente für Ihre Noten. Abhängig vom Werkzeug, das Sie im Notations-Werkzeugfeld auswählen, ändert sich die Auswahl an nutzbaren Optionen im Notationsfeld.
Schreibmodus Noteneingabe Öffnet Abschnitte im Notationsfeld, mit denen Sie verschiedene Dynamikanweisungen festlegen und auswählen können. Ornamente Öffnet Abschnitte im Notationsfeld, mit denen Sie verschiedene Ornamente und Glissando-Linien auswählen können. Tremolos Öffnet einen Abschnitt im Notationsfeld, mit dem Sie verschiedene Tremolos mit einer und mehreren Noten auswählen und entfernen können.
Schreibmodus Noteneingabe Um Noten einzugeben, können Sie eine der folgenden Methoden nutzen und jederzeit zwischen ihnen wechseln: • MIDI-Keyboard • Computertastatur • Maus oder Trackpad TIPP Die schnellste Methode zur Noteneingabe ist ein MIDI-Keyboard. Die Verfahren, die in diesem Kapitel beschrieben werden, beziehen sich auf die aktive Noteneingabe. Informationen zur Notenbearbeitung oder zu den Optionen, die sich auf die Noteneingabe auswirken, werden in der Notationsreferenz behandelt.
Schreibmodus Noteneingabe WEITERFÜHRENDE LINKS Eingabemarke auf Seite 86 Neue Elemente positionieren Die Eingabeposition für neue Elemente hängt davon ab, ob Sie Noten eingeben oder bearbeiten. Wenn Sie Noten eingeben und die Eingabemarke aktiviert ist, erstellt Dorico alle Noten oder Notationselemente an der rhythmischen Position der Eingabemarke.
Schreibmodus Noteneingabe Sie können alle folgenden Methoden nutzen, um die Noteneingabe zu beginnen: • Doppelklicken Sie auf die rhythmische Position in der Notenzeile, wo Sie mit der Eingabe von Noten beginnen möchten. • Wählen Sie eine Note, einen Akkord, eine Pause oder ein anderes Element an der rhythmischen Position in der Notenzeile aus, wo Sie mit der Eingabe von Noten beginnen möchten, und drücken Sie [Umschalttaste]-N oder die [Eingabetaste].
Schreibmodus Noteneingabe In Dorico ist die Eingabemarke eine vertikale Linie, die oben und unten aus der Notenzeile herausragt. Wenn Sie Noten eingeben, wird die Eingabemarke automatisch an die nächste rhythmische Position gerückt. Wenn Sie Akkorde eingeben, bewegt sich die Eingabemarke nicht von selbst, sondern muss manuell an die nächste rhythmische Position gerückt werden.
Schreibmodus Noteneingabe • Nutzen Sie die [Pfeil-nach-oben-Taste] und die [Pfeil-nach-unten-Taste], um die Eingabemarke eine Notenzeile nach oben bzw. nach unten zu verschieben. Wenn Sie bei Nutzung der Pfeiltasten die [Strg]-Taste/[Befehlstaste] gedrückt halten, können Sie die Eingabemarke in die oberste oder die unterste Notenzeile im System verschieben.
Schreibmodus Noteneingabe • Wählen Sie Schreiben > Rhythmisches Raster und wählen Sie dann eine der verfügbaren Zählzeitunterteilungen aus. WEITERFÜHRENDE LINKS Statuszeile auf Seite 42 Noten eingeben Wenn Sie Noten eingeben, müssen Sie den Notenwert vor der Tonhöhe festlegen. Optional können Sie vor dem Festlegen der Tonhöhe auch Vorzeichen und Artikulationen hinzufügen. VORGEHENSWEISE 1. Wählen Sie eine der Methoden, um mit der Noteneingabe zu beginnen. 2.
Schreibmodus Noteneingabe WEITERFÜHRENDE LINKS Ansichtstypen auf Seite 44 Akkorde eingeben HINWEIS Wenn Sie Akkorde eingeben, müssen Sie die Eingabemarke manuell an die nächste Position rücken. VORGEHENSWEISE 1. Um die Akkordeingabe zu aktivieren, führen Sie einen der folgenden Schritte aus: • Drücken Sie die Q. • Aktivieren Sie im Noten-Werkzeugfeld die Option Akkorde . 2. Geben Sie die Akkordnoten ein. 3. Rücken Sie die Eingabemarke an die nächste Notenposition. 4.
Schreibmodus Noteneingabe • Drücken Sie eine Taste von A bis G auf Ihrer Computertastatur. ERGEBNIS Eine Pause mit der ausgewählten Dauer wird zur Partitur hinzugefügt. Wenn Sie mehr als eine Pause hinzufügen, verbindet Dorico die Pausen automatisch zu einer Pause mit einer anderen Dauer, die in Verbindung mit den eingegebenen Noten sinnvoll ist. Pausen mit einer bestimmten Dauer einfügen Sie können Dorico zwingen, Pausen mit einer bestimmten Dauer einzufügen. VORGEHENSWEISE 1.
Schreibmodus Noteneingabe An der Eingabemarke werden ein Pluszeichen sowie eine Note mit einer bestimmten Halsrichtung angezeigt. Wenn Sie bereits zwei Stimmen eingegeben haben, wird an der Eingabemarke außerdem eine Zahl angezeigt, die angibt, in welche Stimme Sie als nächstes eingeben werden. 3. Optional: Drücken Sie erneut [Umschalttaste]-V, um die Halsrichtung der Stimme zu ändern. 4. Geben Sie Noten für die Stimme ein.
Schreibmodus Noteneingabe Dauer ausgewählter Noten ändern Sie können die Dauer ausgewählter Noten verkürzen oder verlängern. VORGEHENSWEISE 1. Wählen Sie eine oder mehrere Noten aus. 2. Aktivieren Sie eine abweichende Dauer im Notenfeld oder geben Sie den entsprechenden Tastaturbefehl ein.
Schreibmodus Noteneingabe 2. Geben Sie eine Note ein. WEITERFÜHRENDE LINKS Tastaturbefehle in Dorico auf Seite 6 Artikulationen hinzufügen Sie können während der Noteneingabe Artikulationen zu Noten oder Akkorden hinzufügen. VORGEHENSWEISE 1. Um eine Artikulation hinzuzufügen, führen Sie einen der folgenden Schritte aus: • Geben Sie auf der Tastatur den entsprechenden Tastaturbefehl für eine Dauer ein. • Aktivieren Sie im Notenfeld einen der Artikulationsschalter.
Schreibmodus Noteneingabe VORGEHENSWEISE 1. Führen Sie einen der folgenden Schritte aus: • Aktivieren Sie im Noten-Werkzeugfeld die Option Vorschläge • Geben Sie den entsprechenden Tastaturbefehl ein. . 2. Wählen Sie im Notenfeld eine Dauer aus. 3. Optional: Geben Sie den entsprechenden Tastaturbefehl ein, um zwischen durchgestrichenen und nicht durchgestrichenen Vorschlägen zu wechseln. HINWEIS Der eingegebene Vorschlagstyp wird innerhalb des Werkzeugsymbols angezeigt.
Schreibmodus Noteneingabe • Wählen Sie im Notations-Werkzeugfeld die Option Taktbezeichnungen . Wählen Sie im Notationsfeld eine der Taktarten im Abschnitt Häufig verwendet aus oder erstellen Sie im Abschnitt Taktart erstellen eine benutzerdefinierte Taktart. WEITERFÜHRENDE LINKS Benutzerdefinierte Taktarten erstellen auf Seite 96 Taktarten mit Auftakt hinzufügen Sie können einen Auftakt in Kombination mit Taktarten festlegen. VORGEHENSWEISE 1. Wählen Sie die erste Note oder Pause in der Notenzeile aus.
Schreibmodus Noteneingabe Die Taktartanzeige am unteren Rand des Abschnitts zeigt, was in die Partitur eingegeben wird. 5. Optional: Aktivieren Sie Auftakt mit und wählen Sie den gewünschten Auftakt aus dem Einblendmenü. 6. Klicken Sie auf die angezeigte Taktart. 7. Optional: Wenn Sie keine Note und keinen Akkord ausgewählt haben, können Sie den Mauszeiger an die Position verschieben, wo Sie die Taktart einfügen möchten, und klicken. ERGEBNIS Die Taktart wird eingefügt.
Schreibmodus Noteneingabe Alternierende Taktarten Geben Sie eine Taktart ein, gefolgt von einem Leerzeichen, einem Pluszeichen und einem weiteren Leerzeichen, und geben Sie danach eine alternierende Taktart ein. BEISPIEL 3/8 + 2/8 erstellt die folgende Taktart: Wechselnde Taktarten Geben Sie eine Taktart, ein Leerzeichen und danach eine andere Taktart in Klammern ein.
Schreibmodus Noteneingabe Liedtext Dorico ermöglicht Ihnen die Eingabe mehrerer Zeilen mit Liedtext, Refraintext und Übersetzungen. Sie können Liedtext über oder unter den Notenzeilen eingeben. Mit Hilfe eines Einblendfelds und einer Reihe von Tastaturbefehlen können Sie Liedtext Zeile für Zeile und Silbe für Silbe hinzufügen. Der gesamte Liedtext wird automatisch horizontal an den Noten ausgerichtet, zu denen er gehört. Mehrere Textzeilen werden automatisch vertikal ausgerichtet.
Schreibmodus Noteneingabe Aufgabe Tastaturbefehl HINWEIS Nur verfügbar, wenn Sie eine Note, eine Pause oder eine Silbe ausgewählt haben. Aktuelles Wort abschließen und mit der nächsten Note oder dem nächsten Akkord fortfahren. [Leertaste] Aktuelle Silbe abschließen und mit der nächsten Note oder dem nächsten Akkord fortfahren. - (Bindestrich) Fülllinie einfügen, um anzuzeigen, dass ein Wort über mehrere Noten hinweg gesungen wird.
Schreibmodus Noteneingabe VORGEHENSWEISE 1. Wählen Sie die Note oder den Akkord aus, wo Sie mit dem Hinzufügen von Liedtext beginnen möchten. 2. Führen Sie einen der folgenden Schritte aus: • Drücken Sie [Umschalttaste]-L. • Klicken Sie auf Liedtext . Es wird ein Einblendfeld geöffnet, das Ihnen die Zeilennummer anzeigt, für die Sie den Liedtext eingeben. 3. Optional: Drücken Sie die [Pfeil-nach-unten-Taste]/[Pfeil-nach-oben-Taste], um die Zeilennummer anzugeben. 4. Geben Sie den Liedtext ein.
Schreibmodus Noteneingabe Übersetzungen hinzufügen Sie können Übersetzungen zu Liedtext- und Refrainzeilen hinzufügen HINWEIS Es gelten die Standard-Tastaturbefehle für das Hinzufügen von Liedtext. VORGEHENSWEISE 1. Wählen Sie die Silbe einer Liedtextzeile bzw. die Note oder den Akkord aus, wo Sie mit dem Hinzufügen von Übersetzungen beginnen möchten. 2. Drücken Sie [Umschalttaste]-L. 3.
Schreibmodus Noteneingabe 2. Klicken Sie dann mit der rechten Maustaste darauf und wählen Sie Liedtext > Zeile > Zeile aus dem Kontextmenü. HINWEIS Alternativ können Sie auch mit der linken Maustaste klicken, ein Rechteck um die gesamte Zeile ziehen und im Eigenschaften-Bereich im Liedtext-Abschnitt eine Zahl im Zeilennummer-Feld auswählen. ERGEBNIS Für die Liedtextzeile wird eine andere Zeilennummer angezeigt.
Schreibmodus Noteneingabe HINWEIS Alternativ können Sie auch mit der linken Maustaste klicken, ein Rechteck um die gesamte Zeile ziehen und im Eigenschaften-Bereich im Liedtext-Abschnitt eine Zahl im Zeilennummer-Feld auswählen. ERGEBNIS Die Textzeile wird in die ausgewählte Zeile verschoben. Wenn diese Zeile bereits eine Textzeile enthält, werden die Zeilen ausgetauscht.
Schreibmodus Noteneingabe WEITERFÜHRENDE LINKS Liedtext-Abschnitt auf Seite 113 Silben über oder unter Notenzeilen platzieren Sie können ausgewählte Silben aus Liedtexten über oder unter Notenzeilen platzieren. VORGEHENSWEISE 1. Wählen Sie eine oder mehrere Silben in einer Textzeile aus. 2. Aktivieren Sie im Liedtext-Abschnitt des Eigenschaften-Bereichs in der Zeilenpositionierung-Option Darüber oder Darunter.
Schreibmodus Noteneingabe • Gruppierung von Noten und Pausen, z. B. Umgang mit synkopierten Rhythmen oder unterschiedlichen Rhythmen in verschiedenen Taktarten • Stimmen, z. B. die gemeinsame Nutzung von Notenköpfen in unterschiedlichen Stimmen oder die Anordnung bei der Gruppierung mehrerer Stimmen. • Vorzeichen, z. B. der Umgang mit Erinnerungsvorzeichen • Transposition, z. B.
Schreibmodus Noteneingabe • 3. Um alle Partien auszuwählen, halten Sie die [Umschalttaste] gedrückt und klicken Sie auf die erste und die letzte Partie in der Liste. Alles auswählen Ermöglicht Ihnen die Auswahl aller Partien in der Partien-Liste. 4. Als Standard speichern Speichert alle Optionen, die Sie in den Notensatz-Optionen einstellen, als Standardwerte für neue Projekte. 5. Zeigt untergeordnete Optionen innerhalb einer Kategorie an. Die ausgewählte Option wird hervorgehoben.
Schreibmodus Noteneingabe HINWEIS Sie können Noten oder Notationselemente nur als Ganzes ändern. Wenn Sie einzelne Teile von Noten oder Notationselementen ändern möchten, müssen Sie in den NotensatzModus wechseln, um z. B. die Länge eines Notenhalses zu ändern. Um Noten und Notationselemente in Ihrem Projekt global zu ändern, müssen Sie die Notationsoptionen bearbeiten, siehe Schreiben > Notationsoptionen. VORGEHENSWEISE 1. Wählen Sie eine Note oder ein Notationselement in der Partitur aus. 2.
Schreibmodus Noteneingabe HINWEIS Um eine Artikulation zu bearbeiten, müssen Sie die Note auswählen, zu der die Artikulation gehört. Platzierung Ermöglicht es Ihnen, die Platzierung einer Artikulation einer ausgewählten Note zu ändern. Sie können entscheiden, ob die Artikulation am Notenkopf oder am Notenhals platziert werden soll. Ausgeblendet Ermöglicht es Ihnen, die Artikulation einer ausgewählten Note auszublenden.
Schreibmodus Noteneingabe Zählzeitabhängige Position Nur für sofortige oder kombinierte Dynamikanweisungen sowie für Markierungen der Anschlagstärke verfügbar: Normalerweise wird das optische Zentrum einer Dynamikanweisung an der rhythmischen Position der Note oder des Akkords ausgerichtet. Wenn Sie diese Option aktivieren, können Sie festlegen, dass die Dynamikanweisung am Ende der Zählzeit vor dieser rhythmischen Position positioniert wird.
Schreibmodus Noteneingabe Gabellinienstil Nur verfügbar, wenn Sie Gabel aus dem Einblendmenü CrescendoStil auswählen oder wenn Sie Messa di voce als Typ der allmählichen Dynamikanweisung aktivieren: Ermöglicht es Ihnen, auszuwählen, wie die Linien einer Gabel angezeigt werden sollen. Sie haben die folgenden Optionen: • Durchgezogen Zeigt die Gabel mit durchgezogenen Linien an. • Gestrichelt Zeigt die Gabel mit gestrichelten Linien an. • Gepunktet Zeigt die Gabel mit gepunkteten Linien an.
Schreibmodus Noteneingabe di voce automatisch auf Basis des Rhythmus der Noten im Bereich der Dynamikanweisung bestimmt. Wenn Sie diese Option aktivieren, können Sie die rhythmische Position des Wendepunkts anpassen. Der Wert im linken Feld gibt die primäre rhythmische Position als Bruchteil von Viertelnoten an. Mit dem Wert im rechten Feld können Sie eine sekundäre rhythmische Position innerhalb einer Reihe von Vorschlägen an der primären rhythmischen Position festlegen.
Schreibmodus Noteneingabe Liedtext-Abschnitt Im Liedtext-Abschnitt des Eigenschaften-Bereichs können Sie Änderungen an ausgewählten Silben oder ganzen Zeilen im Liedtext vornehmen. Silbentyp Ermöglicht es Ihnen, den Typ der ausgewählten Silben zu ändern. Zeilenpositionierung Ermöglicht es Ihnen, ausgewählte Silben über oder unter eine Notenzeile zu verschieben. Zeilennummer Ermöglicht es Ihnen, die Zeilennummer für ausgewählte Silben zu ändern.
Schreibmodus Noteneingabe Triller-Abschnitt Im Triller-Abschnitt des Eigenschaften-Bereichs können Sie die Platzierung und Darstellung von ausgewählten Trillern und Trillerlinien ändern. Platzierung Wenn Sie diese Option aktivieren, können Sie einen Triller über oder unter eine Notenzeile verschieben. Anfangsgeschwindigkeit Wenn Sie diese Option aktivieren, können Sie festlegen, wie schnell ein Triller beginnen soll. Die Trillerlinie ändert je nach Ihrer Einstellung automatisch ihre Form.
Notensatzmodus Im Notensatz-Modus können Sie alle Elemente Ihres Projekts bearbeiten und ändern. Sie können festlegen, wie die Seiten Ihres Projekts für den späteren Druck oder Export formatiert werden sollen. Projektfenster im Notensatzmodus Das Projektfenster im Notensatz-Modus enthält die Standard-Werkzeugzeile, den Notenbereich und die Statuszeile.
Notensatzmodus Projektfenster im Notensatzmodus 1. Formatieren Hier können Sie verschiedene Arten von Rahmen in Seiten einfügen und ausrichten. Außerdem können Sie Änderungen an der Formatierung eines Systems auf einer Seite vornehmen. 2. Eigenschaften Hier erhalten Sie schnellen Zugriff auf Eigenschaften, so dass Sie bestimmte Änderungen an einzelnen Teilen von Noten und Notationselementen vornehmen können. 3. Seiten Hier können Sie festlegen, wie die Notation auf Seiten formatiert wird.
Notensatzmodus Projektfenster im Notensatzmodus Rahmen Im Rahmen-Abschnitt können Sie neue Rahmen auf einer Seite erstellen und die Einschränkungen zwischen den Rahmen und den Seitenrändern festlegen. Um Änderungen vorzunehmen, aktivieren Sie diesen Abschnitt. Notenrahmen einfügen Ermöglicht Ihnen das Einfügen eines Rahmens, für den Sie Layouts festlegen können, die Sie anzeigen möchten.
Notensatzmodus Projektfenster im Notensatzmodus WEITERFÜHRENDE LINKS Optionen im Eigenschaften-Bereich auf Seite 141 Eigenschaften einzelner Elemente im Notensatzmodus ändern auf Seite 142 Seitenbereich Der Seitenbereich im Notensatz-Modus bietet mehrere Abschnitte, in denen Sie festlegen können, wie die Seiten Ihrer Notation formatiert werden sollen. Dies erfolgt anhand der typischen Methoden, die auch in DTP-Programmen verwendet werden.
Notensatzmodus Projektfenster im Notensatzmodus Seiten Seitenanzeige Zeigt die Seiten in Ihrem Layout mit ihren Seitenzahlen an. Ein hervorgehobener Seitenrahmen zeigt eine ausgewählte Seite an. Markierungen in der oberen linken und der unteren rechten Ecke der Seiten zeigen an, dass eine Seite Abweichungen von der jeweiligen Musterseite aufweist. Farbige Rahmen an den oberen oder linken Rahmen der Seite zeigen an, dass Änderungen an der Musterseite vorgenommen wurden.
Notensatzmodus Musterseiten Neue Musterseite Ermöglicht es Ihnen, dem Musterseiten-Set eine neue Musterseite hinzuzufügen. Musterseite bearbeiten Öffnet den Musterseiten-Editor, in dem Sie die Formatierung der Musterseite ändern können. Um den Musterseiten-Editor zu schließen, klicken Sie auf Musterseiten-Editor schließen. Musterseite umbenennen Ermöglicht es Ihnen, eine ausgewählte Musterseite umzubenennen. Musterseite löschen Löscht eine ausgewählte Musterseite.
Notensatzmodus Musterseiten Alle Seiten Ihrer Partitur- und Einzelstimmen-Layouts beziehen ihr Format von Musterseiten. Wann immer Sie etwas auf Musterseiten erstellen oder ändern, werden die jeweiligen Aktionen auch auf die Seiten angewandt, die die jeweiligen Musterseiten nutzen. Wenn Sie z. B. einen neuen Rahmen auf einer Musterseite einfügen, wird auf allen Seiten, die diese Musterseite nutzen, ein entsprechender Rahmen eingefügt. In Dorico bestehen Musterseiten aus Seitenpaaren.
Notensatzmodus Musterseiten 2. Wählen Sie Neues Musterseiten-Set . ERGEBNIS Das Musterseiten-Set wird erstellt und zur Liste der Musterseiten-Sets hinzugefügt. Musterseiten-Sets umbenennen Sie können die Namen von Musterseiten-Sets bearbeiten. VORGEHENSWEISE 1. Doppelklicken Sie im Abschnitt Musterseiten-Sets des Seitenbereichs auf das Musterseiten-Set, das Sie umbenennen möchten. HINWEIS Alternativ können Sie auch die Musterseite auswählen und auf Musterseiten-Set umbenennen klicken. 2.
Notensatzmodus Musterseiten HINWEIS Wenn Sie kein Erste-Seitenpaar erstellen, verwendet die erste Seite in Ihrem Layout das Standard-Seitenpaar. Standard Erstellt ein Standard-Seitenpaar, das für alle folgenden linken und rechten Seiten nach der ersten Seite in einem Layout verwendet wird. Jedes Musterseiten-Set muss eine Standard-Musterseite enthalten. Benutzerdefiniert Erstellt ein benutzerdefiniertes Seitenpaar, das hinter der Standard-Musterseite an das Musterseiten-Set angehängt wird. So können Sie z.
Notensatzmodus Musterseiten VORGEHENSWEISE 1. Wählen Sie im Musterseiten-Abschnitt des Seitenbereichs ein Musterseiten-Set aus dem Einblendmenü Aktuelles Set aus. 2. Klicken Sie in der Musterseitenanzeige auf das Musterseitenpaar, das Sie umbenennen möchten. 3. Klicken Sie auf Musterseite umbenennen 4. Geben Sie im Name-Feld des Dialogs Musterseite umbenennen den gewünschten Namen ein. 5. Klicken Sie auf OK. . Musterseiten löschen Sie können Musterseiten aus Musterseiten-Sets löschen.
Notensatzmodus Musterseiten HINWEIS Wenn Sie die Seitengröße und -ränder, Seitenausrichtung sowie Notenzeilengröße für Partitur- und Einzelstimmen-Layouts bearbeiten möchten, müssen Sie die gewünschten Änderungen in den Layoutoptionen festlegen. VORGEHENSWEISE 1. Doppelklicken Sie im Musterseiten-Abschnitt des Seiten-Bereichs auf ein Musterseitenpaar. 2. Nehmen Sie Ihre Änderungen im angezeigten Musterseiten-Editor vor. 3. Klicken Sie auf Musterseiten-Editor schließen.
Notensatzmodus Musterseiten Musterseiten übergehen Sie können Musterseiten-Einstellungen auf einzelnen Seiten in Ihrem Layout übergehen. VORGEHENSWEISE • Führen Sie einen der folgenden Schritte aus: • Um die Rahmen zu bearbeiten, aktivieren Sie im Formatierungsbereich den Rahmen-Abschnitt. HINWEIS Wenn die Optionen Nach Partie filtern und Nach Spieler filtern nicht bearbeitet werden können, müssen Sie die jeweilige Musterseite bearbeiten.
Notensatzmodus Musterseiten ERGEBNIS Abweichungen und Markierungen werden entfernt. Leere Seiten, die als Abweichungen betrachtet werden, werden vollständig entfernt. WEITERFÜHRENDE LINKS Musterseiten übergehen auf Seite 125 Seiten einfügen Sie können leere Seiten oder Seiten auf Basis einer anderen Musterseite in Ihr Layout einfügen. VORGEHENSWEISE 1.
Notensatzmodus Musterseiten Untergeordneter Zahlentyp Hier können Sie der Seitenzahl eine untergeordnete Zahl hinzufügen und deren Art festlegen. Untergeordnete Zahl Hier können Sie die Zahl eingeben, mit der die untergeordnete Zahl beginnen soll. WEITERFÜHRENDE LINKS Seitenzahlen ändern auf Seite 128 Seitenzahlen ändern Sie können die Seitenzahlen der Seiten in Ihrem Layout ändern. In einigen Fällen müssen Sie die Einstellungen ändern, z. B.
Notensatzmodus Musterseiten 3. Optional: Ändern Sie die erste Seite für die Musterseitenänderung anhand der Option Ab Seite. 4. Wählen Sie aus dem Einblendmenü Musterseite verwenden die Musterseite aus, die Sie zuweisen möchten. 5. Wählen Sie für Bereich eine der folgenden Möglichkeiten: • Nur aktuelle Seite Wenn Sie diese Option aktivieren, wird nur die ausgewählte Seite einer anderen Musterseite zugewiesen.
Notensatzmodus Rahmen • Klicken Sie mit der rechten Maustaste und wählen Sie im Kontextmenü Mit vorheriger Seite tauschen oder Mit nächster Seite tauschen. • Klicken Sie auf Mit vorheriger Seite tauschen tauschen oder Mit nächster Seite . ERGEBNIS Die ausgewählte Seite tauscht ihre Position mit der vorherigen oder nächsten Seite innerhalb der Seitenabfolge im Layout.
Notensatzmodus Rahmen ERGEBNIS Der Rahmen wird auf der Seite angezeigt. WEITERE SCHRITTE Sie können die Größe des Rahmens ändern oder seine Einschränkungen festlegen. Wenn Sie einen Notenrahmen eingefügt haben, können Sie festlegen, welche Teile Ihrer Partitur im Rahmen angezeigt werden sollen. Wenn Sie einen Textrahmen eingefügt haben, können Sie Text eingeben. Wenn Sie einen Grafikrahmen eingefügt haben, können Sie eine Grafikdatei laden.
Notensatzmodus Rahmen Layout-Notenrahmen Sie können Layout-Notenrahmen nur auf einzelnen Seiten in Ihrem Layout erstellen und bearbeiten. Sie können Layout-Notenrahmen an beliebigen Stellen auf einer Seite in einer beliebigen Größe einfügen und sie mit anderen Layout-Notenrahmen verbinden, indem Sie sie derselben Layout-Rahmenverkettung zuweisen. TIPP Layout-Notenrahmen ermöglichen es Ihnen z. B., kleinere Notenauszüge aus einer anderen Partie innerhalb von Fußnoten einzufügen.
Notensatzmodus Rahmen mit einem »L« beginnt. Standardmäßig werden an Musterseiten-Notenrahmen Rahmenverkettungen angezeigt, die mit einem »M« beginnen. WEITERFÜHRENDE LINKS Rahmenverkettungen auf Seite 133 Musterseiten auf Seite 120 Musterseiten übergehen auf Seite 125 Musterseiten-Editor auf Seite 124 Rahmenverkettungen Eine Rahmenverkettung ist eine Reihe von Notenrahmen, die Noten in einer zuvor festgelegten Reihenfolge anzeigen.
Notensatzmodus Rahmen Textrahmen Um Text einzugeben, doppelklicken Sie in den Textrahmen. WEITERFÜHRENDE LINKS Rahmen in Seiten einfügen auf Seite 130 Grafikrahmen Grafikrahmen ermöglichen es Ihnen, Bilder oder Zeichnungen in verschiedenen Formaten in Ihre Partitur aufzunehmen. Sie können Grafikdateien in den folgenden Formaten laden: • • • .jpg, .jpeg .png .svg Grafikrahmen Um ein Bild zu laden, doppelklicken Sie in den Grafikrahmen.
Notensatzmodus Rahmen ERGEBNIS Das Bild wird in den Rahmen geladen. WEITERFÜHRENDE LINKS Grafikrahmen auf Seite 134 Einschränkungen In Dorico legen Einschränkungen die Beziehung zwischen den vier Seiten eines Rahmens und den entsprechenden Seitenrändern fest. Ein Notenrahmen, der z. B. die gesamte Höhe und Breite einer Seite ausfüllt, hat an allen vier Seiten Einschränkungen: Alle Seiten haben einen Abstand von Null, d. h. die Ränder des Rahmens sind mit den Seitenrändern identisch.
Notensatzmodus Rahmen 2. Wählen Sie im Notenbereich den Rahmen aus, für den Sie die Einschränkungen bearbeiten möchten. 3. Klicken Sie im Rahmen-Abschnitt unter Einschränkungen auf das Schloss Seite des Rahmens, die Sie ändern möchten. 4. Führen Sie einen der folgenden Schritte aus: für die • Verschieben Sie die entsperrte Seite an die gewünschte Position. • Geben Sie im Rahmen-Abschnitt im Eigenschaften-Bereich einen festen Wert für Höhe oder Breite ein.
Notensatzmodus Rahmen HINWEIS Die Auswahlmenüs Nach Partie filtern und Nach Spieler filtern von MusterseitenNotenrahmen können nur auf Musterseiten bearbeitet werden. 1. Rahmenverkettung Hier können Sie auswählen, in welche Rahmenverkettung der Notenrahmen eingebunden werden soll. Rahmen, die mit einem »M« beginnen, sind MusterseitenNotenrahmen; Rahmen, die mit einem »L« beginnen, sind Layout-Notenrahmen. 2.
Notensatzmodus Rahmen VORAUSSETZUNGEN Wenn Sie einer Layout-Rahmenverkettung einen Notenrahmen zuweisen, müssen Sie den Rahmen-Abschnitt des Formatierungsbereichs aktivieren. HINWEIS Neue Notenrahmen auf einer Seite beginnen immer eine neue Rahmenverkettung, unabhängig von ihrem Typ. VORGEHENSWEISE 1. Öffnen Sie an einem Layout-Notenrahmen oder einem Musterseiten-Notenrahmen das Rahmenverkettung-Auswahlmenü aus, die Sie verwenden möchten. 2. und wählen Sie die Rahmenverkettung Schließen Sie die Auswahl.
Notensatzmodus Rahmen WEITERFÜHRENDE LINKS Notenrahmenauswahl auf Seite 136 Rahmenverkettungen Partien zuweisen Sie können verschiedene Partien in verschiedenen Rahmenverkettungen anzeigen. HINWEIS Sie können Partien nur Musterseiten-Notenrahmen zuweisen. VORGEHENSWEISE 1. Doppelklicken Sie im Musterseiten-Abschnitt des Seiten-Bereichs auf eine Musterseite, um den Musterseiten-Editor zu öffnen. 2. Öffnen Sie im Musterseiten-Notenrahmen Partien Partie aus, die im Notenrahmen angezeigt werden soll. 3.
Notensatzmodus Eigenschaften im Notensatzmodus Eigenschaften im Notensatzmodus Im Notensatz-Modus können Sie Noten, Notationselemente oder Teile davon einzeln oder global bearbeiten. Wenn Sie Noten oder Notationselemente einzeln bearbeiten möchten, können Sie den Eigenschaften-Bereich verwenden, in dem Sie direkte Änderungen an ausgewählten Elementen in der Partitur vornehmen können. Um globale Änderungen vorzunehmen, können Sie die Notensatz-Optionen verwenden.
Notensatzmodus Eigenschaften im Notensatzmodus Notensatz-Optionen (Dialog) Der Dialog Notensatz-Optionen ist in eine Liste von Notationskategorien und einen Bereich mit allen verfügbaren Optionen für die ausgewählte Kategorie unterteilt. Innerhalb dieses Bereichs sind alle Optionen in Unterkategorien gegliedert. Projektweite Änderungen im Notensatzmodus vornehmen Sie können in den Notensatz-Optionen projektweite Änderungen für Noten und Notationselemente vornehmen.
Notensatzmodus Eigenschaften im Notensatzmodus Die im Eigenschaften-Bereich verfügbaren Optionen hängen von dem Element ab, das Sie in Ihrer Partitur auswählen. Wenn Sie also eine Note oder ein Notationselement bzw. einen Teil davon auswählen und den Eigenschaften-Bereich öffnen, werden dort die Abschnitte und die jeweiligen Optionen angezeigt, die Sie zur Bearbeitung des ausgewählten Elements benötigen.
Notensatzmodus Eigenschaften im Notensatzmodus gewünschten Wert in die X- und Y-Felder ein oder wählen Sie ihn darin aus. Der X-Wert verschiebt das Element horizontal, der Y-Wert verschiebt es vertikal. Stummgeschaltet Wenn Sie diese Option aktivieren, werden ausgewählte Noten oder Akkorde während der Wiedergabe stummgeschaltet. Sie können auch andere Notationselemente stummschalten, die sich auf die Wiedergabe auswirken, z. B. Dynamikanweisungen.
Notensatzmodus Eigenschaften im Notensatzmodus Gemeinsame Optionen für alle Dynamikwechsel Beginn Versatz Wenn Sie diese Option aktivieren, können Sie eine ausgewählte Dynamikanweisung in Bruchteilen von Spatien horizontal und vertikal verschieben. Geben Sie dazu die gewünschten Werte in die X- und Y-Felder ein oder wählen Sie sie darin aus. Der X-Wert verschiebt die Dynamikanweisung horizontal, der Y-Wert verschiebt sie vertikal.
Notensatzmodus Eigenschaften im Notensatzmodus Die folgenden Optionen sind verfügbar: • Vor Positioniert die Dynamikanweisung am Ende der letzten Zählzeit. • Nach Positioniert die Dynamikanweisung an der nächsten rhythmischen Position nach der letzten Zählzeit. Textausrichtung Nur für sofortige oder kombinierte Dynamikanweisungen sowie für Markierungen der Anschlagstärke verfügbar: Wenn Sie diese Option aktivieren, können Sie eine Dynamikanweisung an der ihr zugewiesenen Note ausrichten.
Notensatzmodus Eigenschaften im Notensatzmodus Zeigt die Gabel mit durchgezogenen Linien an. • Gestrichelt Zeigt die Gabel mit gestrichelten Linien an. • Gepunktet Zeigt die Gabel mit gepunkteten Linien an. Niente Fügt einem Crescendo, Diminuendo oder Messa di voce ein Niente hinzu.
Notensatzmodus Eigenschaften im Notensatzmodus Wenn Sie diese Option aktivieren, können Sie die rhythmische Position des Wendepunkts anpassen. Der Wert im linken Feld gibt die primäre rhythmische Position als Bruchteil von Viertelnoten an. Mit dem Wert im rechten Feld können Sie eine sekundäre rhythmische Position innerhalb einer Reihe von Vorschlägen an der primären rhythmischen Position festlegen.
Notensatzmodus Eigenschaften im Notensatzmodus Diminuendo-Stil Nur verfügbar, wenn Sie für ein Diminuendo cresc./dim. aus dem Einblendmenü Crescendo-Stil auswählen: Wenn Sie diese Option aktivieren, können Sie den Text auswählen, den Sie für ein Diminuendo anzeigen möchten, und auf diese Weise die Begriffe »Diminuendo« und »Decrescendo« wahlweise verwenden.
Notensatzmodus Eigenschaften im Notensatzmodus Trennzeichen Wenn Sie diese Option aktivieren, können Sie die Art von Trennzeichen im Einblendmenü festlegen. Liedtext-Abschnitt Im Liedtext-Abschnitt des Eigenschaften-Bereichs können Sie Änderungen an ausgewählten Silben oder ganzen Zeilen im Liedtext vornehmen. Silbentyp Ermöglicht es Ihnen, den Typ der ausgewählten Silben zu ändern. Zeilenpositionierung Ermöglicht es Ihnen, ausgewählte Silben über oder unter eine Notenzeile zu verschieben.
Notensatzmodus Eigenschaften im Notensatzmodus Index Wenn Sie Zahlen oder Buchstaben als Abfolgeart ausgewählt haben und diese Option aktivieren, können Sie die Zahl oder den Buchstaben, mit dem das ausgewählte Studierzeichen beginnen soll, erhöhen oder erniedrigen. Triller (Abschnitt) Im Triller-Abschnitt des Eigenschaften-Bereichs können Sie die Platzierung und Darstellung von ausgewählten Trillern und Trillerlinien ändern.
Notensatzmodus Eigenschaften im Notensatzmodus Endversatz X Wenn Sie diese Option aktivieren, können Sie das Ende eines ausgewählten Trillers um den Wert verschieben, den Sie im X-Feld auswählen. Innerhalb von Bindebögen, Triolen/X-tolen und Oktavzeichen Wenn Sie diese Option aktivieren, wird der ausgewählte Triller innerhalb von Bindebögen, Triolen/X-tolen und Oktavzeichen positioniert.
Druckmodus Im Drucken-Modus können Sie Ihre Layouts drucken oder als Grafikdateien exportieren. Projektfenster im Drucken-Modus Das Projektfenster im Drucken-Modus enthält die Standard-Werkzeugzeile und den Druckvorschaubereich sowie Bereiche und Abschnitte mit Werkzeugen und Funktionen, die Ihnen die Vorbereitung des Drucks oder Exports Ihrer Layouts ermöglichen. Sie haben die folgenden Möglichkeiten, den Drucken-Modus zu öffnen: • Wählen Sie Drucken in der Werkzeugzeile.
Druckmodus Projektfenster im Drucken-Modus Enthält Mac OS-spezifische Druckoptionen. WEITERFÜHRENDE LINKS Werkzeugzeile auf Seite 35 Druckvorschaubereich auf Seite 39 Layouts-Bereich Im Drucken-Modus zeigt der Layouts-Bereich eine Liste mit allen Layouts im Projekt an und ermöglicht es Ihnen, eine Auswahl zum Drucken oder Exportieren zu treffen. 1. Ermöglicht es Ihnen, jedes Layout zu erweitern, so dass Sie die Seitengröße und die Seitenanzahl sehen können.
Druckmodus Projektfenster im Drucken-Modus Alle Optionen, die Sie im Druckoptionen-Bereich einstellen, werden in Ihrem Projekt gespeichert. Die Optionen sind in fünf Abschnitte unterteilt: Ziel Ermöglicht Ihnen die Auswahl eines physischen Druckers für den Druck bzw. eines Speicherorts zum Exportieren einer Grafikdatei. Wenn Sie Ihre Arbeit drucken, können Sie wählen, wie viele Kopien gedruckt werden sollen.
Druckmodus Layouts drucken Auftragstyp Ermöglicht Ihnen die Auswahl des zu druckenden/exportierenden Seitenbereichs und die Anordnung der Seiten. Seite einrichten Ermöglicht Ihnen die Einstellung der Papiergröße und der Ausrichtung. Sie können außerdem den Skalierungsfaktor des Bildes wählen, das gedruckt/ exportiert werden soll. Doppelseitiger Druck Ermöglicht es Ihnen, einzustellen, ob eine oder beide Seiten jedes Papierbogens bedruckt werden sollen.
Druckmodus Layouts drucken ERGEBNIS Das Drucker-Einblendmenü im Ziel-Abschnitt zeigt nur dann den Namen eines Druckers an, wenn alle ausgewählten Layouts für den Druck auf demselben Drucker eingestellt sind. Wenn Sie einen neuen Drucker auswählen, werden alle ausgewählten Layouts auf diesen Drucker eingestellt. WEITERFÜHRENDE LINKS Mehrere Layouts drucken/exportieren auf Seite 161 Anzahl der zu druckenden Kopien festlegen Für jedes Layout können Sie festlegen, wie viele Kopien gedruckt werden sollen.
Druckmodus Layouts drucken Beide Seiten automatisch Bedruckt automatisch beide Seiten der Papierbögen. Diese Option ist nur verfügbar, wenn Ihr Drucker diese Funktion unterstützt. Gedrucktes Bild umkehren Die unteren Einblendmenüs legen fest, wie das gedruckte Bild beim Bedrucken der Rückseite des Papierbogens umgekehrt werden soll. Bildumkehrung für die Rückseite bei Druckern mit Längs-Papiereinzug Bestimmt, wie das Bild umgekehrt werden soll, wenn das Papier längs eingezogen wird.
Druckmodus Layouts als Grafikdateien exportieren Mac OS-spezifische Druckoptionen einstellen (nur OS X)/(nur macOS) Dorico ermöglicht Ihnen den Zugriff auf die Standard-Druckoptionen Ihres Betriebssystems. HINWEIS Wenn Sie die Standard-Druckoptionen Ihres Betriebssystems verwenden, werden die programminternen Einstellungen im Bereich mit den Druckoptionen ignoriert. Mac OSspezifische Druckeinstellungen werden nicht in Ihrem Projekt gespeichert.
Druckmodus Layouts als Grafikdateien exportieren 3. Optional und nur für die Dateiformate PNG und TIFF: Wählen Sie aus dem AuflösungEinblendmenü einen der dpi-Werte aus. HINWEIS Eine Auflösung von 72 dpi eignet sich für die Bildschirmanzeige: Sie können Grafiken mit dieser Auflösung z. B. in E-Mails oder auf Webseiten einbinden. Wenn Sie 300 oder 600 dpi wählen, wird ein hochauflösendes Bild gespeichert, das Sie als Illustration in ein Textverarbeitungs- oder DTP-Dokument aufnehmen können.
Druckmodus Layouts als Grafikdateien exportieren SVG-Dateien SVG-Dateien betten Schriften nicht direkt ein: Einige Schriftzeichen wie Notenköpfe, Artikulationen und Vorzeichen werden in Umrisslinien konvertiert, damit sie nicht von der Schrift abhängig sind, aus der sie stammen. Andere Schriftzeichen wie Taktarten und Ziffern an Triolen und X-tolen werden anhand von Verweisen auf die Schriftart codiert, aus der sie stammen.
Druckmodus Mehrere Layouts drucken/exportieren Beispiel: MeinProjekt Sopran 2016-05-01-143723.pdf Mehrere Layouts drucken/exportieren Sie können mehrere Layouts gleichzeitig drucken bzw. exportieren. VORGEHENSWEISE 1. 2. Wählen Sie im Layouts-Bereich die Layouts aus, die Sie drucken bzw. exportieren möchten. • Um eine Reihe von Layouts auszuwählen, drücken Sie die [Umschalttaste] und wählen Sie das erste und das letzte Layout der Reihe.
Druckmodus Umgang mit Seitengrößen und Papiergrößen HINWEIS • Je nach ausgewähltem Auftragstyp dreht Dorico die Ausrichtung automatisch. Die geänderte Ausrichtung wird im Notenbereich sofort sichtbar. Wenn dies nicht gewünscht ist, können Sie die Ausrichtung im Dialog Seite einrichten manuell einstellen. • Bei allen Auftragstypen können entweder eine Seite oder beide Seiten eines Papierbogens bedruckt werden.
Druckmodus Umgang mit Seitengrößen und Papiergrößen Sie können für jedes Layout in Ihrem Projekt eine Seitengröße in den Layout-Optionen festlegen. Dadurch definieren Sie die Abmessungen des Layouts. Um Ihr Layout zu drucken, müssen Sie eine Papiergröße wählen, die vom verwendeten Drucker unterstützt wird. Für gewöhnlich sind die Seitengröße des Layouts und die Papiergröße für den Druck identisch.
Druckmodus Anmerkungen An Papier anpassen Skaliert das Layout so, dass es auf den Papierbogen passt. Eigene Skalierung Ermöglicht es Ihnen, eine eigene Skalierung für das Layout festzulegen. Geben Sie den gewünschten Prozentwert im Skalierungsfaktor-Feld ein. Anmerkungen Wenn Sie Ihre Layouts zwecks Publikation drucken/exportieren, können Sie typische Anmerkungen hinzufügen. Verleger und Druckereien können sie nutzen, um das gedruckte Bild einwandfrei zu erkennen und zu registrieren bzw.
Stichwortverzeichnis A Dauer auswählen 92 doppelseitiger Druck 156 Drucken Datum und Zeit hinzufügen 164 doppelseitiger Druck 156 einen Seitenbereich festlegen 162 Layout-Seiten anordnen 161 Rahmen hinzufügen 164 Schnittmarken hinzufügen 164 Wasserzeichen hinzufügen 164 Drucker Anzahl von Kopien festlegen 156 für Layout auswählen 155 Druckmodus öffnen 152 Druckvorschau 39 Druckvorschaubereich 39 Akkorde die Eingabemarke verschieben 87 eingeben 90 Arbeitsumgebung ändern 36 Ändern der Programmeinstellungen
Stichwortverzeichnis Schnittmarken hinzufügen 164 Schwarzweiß-Grafiken 159 Wasserzeichen hinzufügen 164 platzieren 104 Refrainzeilen hinzufügen 101 Silben ausrichten 105 Silben platzieren 105 Tastaturbefehle 99 Übersetzungen hinzufügen 102 Zeilen in andere Zeilen verschieben 103 Zeilennummer ändern 102 F Farbgrafiken 159 G M Gesamtpartitur Spieler aus Layout ausschließen 65 Globale Notationseinstellungen 141 Gruppen 29, 68 Ensembles hinzufügen 70 hinzufügen 69 löschen 69 Namen ändern von 69 Spieler en
Stichwortverzeichnis eingeben 83, 83, 89 einzelne Eigenschaften bearbeiten 142 einzelne Teile bearbeiten 141 im rhythmischen Raster positionieren 88 modifizieren 79 Punktierungen hinzufügen 93 Vorschläge eingeben 94 Vorzeichen 80 Vorzeichen hinzufügen 93 Notenbereich 38 andere Ansicht auswählen 50 Zoom-Einstellungen 45 Notenrahmen Auswahl 136 Rahmenverkettungen zuweisen 137 Notensatz-Optionen 140 Notensatzmodus öffnen 115 Notenwerte auswählen 92 Notenzeilen Liedtext platzieren 104 Liedtextsilben platzieren
Stichwortverzeichnis W Seitenzahlen entfernen 127 Stil ändern 127 Silben in andere Zeilen verschieben 104 Zeilennummer ändern 103 Solospieler hinzufügen 62 Spieler 28, 61 aus Gesamtpartitur-Layout ausschließen 65 aus Gruppen entfernen 70 aus Partien ausschließen 65 duplizieren 63 einzelne Spieler hinzufügen 62 Gruppen zuweisen 70 in Einzelstimmen einschließen 65 kopieren 63 löschen 64 Namen ändern von 64 Rahmenverkettungen zuweisen 139 Satzspieler hinzufügen 63 Solospieler hinzufügen 62 sortieren 64 umben