User Manual

WAVELAB
10 – 238 Master Section
3. Make sure Catch mode is active.
4. Press the first combination of keys that you want to use.
You can include modifiers ([Shift], [Ctrl], [Alt], etc.) if you like. There is also a setting that
makes the program distinguish between two modifiers with the same label, on each side of
the space bar.
5. Proceed with the following key(s).
6. Disable Catch mode.
This is just a safety measure so that you don’t accidentally erase or add to your current key
sequence, when pressing more keys.
7. Close the dialog.
8. Use the Default Key Action buttons to decide whether your key se-
quences will invoke the “Replace”, “Mask” or “Append” load method.
This setting is global to all Key sequences.
Using key sequences
Key sequences can only be invoked when the Master Section Presets di-
alog is closed. Press the keys in the order they were entered in the dialog,
and the preset is loaded.
Saving and loading preset groups
You can save one or more created presets as a preset group for easy ac-
cess. If you have added presets to the Preset window and want to save
them as a group, use the drop-down menu at the bottom of the dialog to
enter a name for the group and save it.
When you have saved a set of presets as a group, you can delete the pre-
sets themselves, since they are saved in the group and can be recalled by
selecting that group from the drop-down menu.
This function is useful if you are working on several projects, since it
makes for a convenient way to keep specific Master Section presets for
specific projects well organized and easily accessible.