User Manual

WAVELAB
Batch processing 12 – 291
• If you use the “+” button or drop below the existing list, the processor will be
added at the end of the list.
You can also do this by double clicking the processor in the list to the right.
• If you drag and drop on another symbol, it will be added just before that proces-
sor in the list.
If you create an “impossible” combination of effects, for example feed a
mono output into a processor that only accepts stereo input, you will get an
error message when you try to process.
Removing processors from the list
To remove a processor, select it in the left list and click the Remove but-
ton or press [Backspace].
Changing the order of the processing
If you have added the correct processors, but realize they are in the
wrong order, you may change this:
1. Select a processor in the list.
2. To move it one step up/down, click the up/down arrow buttons.
Activating and deactivating processors
You can activate or deactivate a processor in the sequence list by clicking
in the checkbox to the left.
Making settings for a processor
If you want to adjust the settings for a certain processor, proceed as fol-
lows:
1. Double click on the processor in the sequence list, or select the proces-
sor in the list and click the Edit button (the fader).
The panel for the processor appears.
2. Adjust the settings (or select another preset) and click OK.
See “Making settings – The Effect control panels” on page 227 for more information on
processor panels and presets.
Some off-line processors (shown with “blue”, “yellow” or “green” icons) may
not have presets. In this case, you have to adjust the settings on the panel.