User Manual

WAVELAB
The Audio Montage 19 – 385
3. Select the audio file containing the regions in the middle pane.
Now any defined CD/DVD Track, Loop, Mute or Region Start/End markers in the audio file
are shown in the right pane.
4. Now you can drag any region into the Montage.
When you drop the region, a pop-up menu appears, allowing you to select one of the Insert
options – see “The Insert options” on page 388. You can only drag one region at a time us-
ing this method.
By importing files
1. In the Track View, click in the track on which you want to put the clip, at
the desired position.
This sets the Montage cursor position (as indicated by the vertical line) and selects the
track (as indicated by the highlighted Track Control area to the left).
2. Right-click in an empty area on the track and select “Insert file(s)…” from
the pop-up menu that appears.
A regular file dialog appears. You can also open this from the Files view : File menu.
• On this menu you also have the option to import a surround audio file, see
“About the “Import Surround audio file” option” on page 520.
3. Locate and select the file(s) you want to import, and click Open.
Depending on whether you have selected one or several files, the Insert options pop-up or
the Insert audio files dialog will appear (see “The Insert options” on page 388). The new
clips are then added, ordered according to your settings.
The two clips shown in the picture above have been imported. The first clip has been
positioned at the Montage cursor. Note the default pre-gap time inserted between the
first and the second clip.