User Manual

WAVELAB
The Audio Montage 19 – 401
The track activity indicator
The track activity indicator is located on the right side of the Track Control
area. This shows the volume level for audio tracks. It is not intended to
give exact level readings but rather to provide an overview of which tracks
are currently playing back audio, and at what approximate level.
About the track gain faders
The track gain faders are located to the left of the track activity indicator in
the Track Control area. They provide a simple way of adjusting the level
for all clips on an audio track.
• The track gain is independent from both the volume envelope and the clip
gain.
• The track gain can be lowered down to -48 dB, and increased up to 6 dB.
If you change the level by dragging the faders, the fader handles change from grey to red/
blue to indicate that the level is offset from the default 0 dB setting. If you point at the fad-
ers, the current gain setting is shown.
• In the audio chain, the track gain affects the level post any track effects
and before the Master Section.
• The track activity meter does not reflect the track gain setting, nor is track
gain reflected in the waveform.
• Press [Shift] and drag a fader handle to change the level for the left or
right side of a stereo track separately.
Press [Ctrl] and click on the fader to reset the level to 0 dB.
The track activity indicator