User Manual

WAVELAB
19 – 406 The Audio Montage
Recording
If you have an audio card with multiple inputs and an ASIO driver you can
record up to 8 channels simultaneously. For a description on how to set up
and record multiple channels, see “Multichannel recording” on page 521.
It is possible to record audio and have it appear directly as a clip in the
Audio Montage. There are several ways to do this:
By using the track pop-up menu
1. Move the Montage cursor to the position where you want the recorded
clip to appear.
2. Select Record at cursor from the track pop-up menu for the desired track.
The Record dialog appears. The option “Add to selected track of Montage” is automatically
activated, and stereo or mono is automatically selected depending on the selected track.
3. Proceed as when recording into a Wave window.
When you finish recording, a clip is created at the cursor position.
By using the track pop-up menu during playback
1. Start playback.
2. Select Record at cursor from the track pop-up menu for the desired track.
The Record dialog appears as in the previous example.
3. Make settings as when recording into a Wave window.
4. Activate recording.
The clip will be inserted at the position where the Montage cursor was the moment you ac-
tivated recording. If you first go into Pause mode and then activate recording, you will get a
“pre-roll” time according to the Pause buffer, allowing you to capture the audio just before
you start recording.