User Manual

WAVELAB
The Audio Montage 19 – 423
Resize clips (tied audio source)
When you resize a clip using this method, the audio source is “tied” to the
edge you are moving. This means that the audio is “scrolled” at the other
edge of the clip, as in the picture below.
1. Point at the left or right edge of the clip, and press [Ctrl].
2. Click and drag to the right or left.
The start and end positions and length of the clip are displayed on the info line while you are
dragging.
In this example, the right edge of the clip is moved to the right. As a result, the start point
of the clip will refer to an earlier position in the audio file.
• Magnetic bounds and the auto-grouping options apply as when resizing
with static audio source.
• It is also possible to assign either the upper of lower half of the clip edge
to this alternate resize method.
This is done on the Edit view : Options menu, by selecting “Resize clip (tied audio source)”
for the upper or lower clip edges on the Mouse zones submenu. In this case, you don’t need
to press [Ctrl] in step one above, but you must take care to aim at the desired mouse zone
(upper or lower) when you resize the clip.
Resize clips (tied audio source) selected for the lower half of the clip edges.
Resizing all selected clips
• If you press [Alt] when resizing, all selected clips will be resized by the
same amount.
To resize multiple selected clips using tied audio sources press [Alt] + [Ctrl] (unless you
have assigned a mouse zone for this).