User Manual

WAVELAB
The Audio Montage 19 – 429
To set the cue point for a clip, proceed as follows:
1. If you want to set the cue point at an arbitrary position, move the Montage
cursor to that position.
This may be within the clip or outside it.
2. Right-click on the clip to bring up the clip speed menu.
3. Open the Cue point submenu.
4. Select one of the functions on the submenu:
Each clip can only have one cue point. This means that if you repeat the
procedure above and select another option on the submenu, the cue point
will be moved to a new position.
Option Description
Set at cursor Sets the cue point at the current Montage cursor position.
Follows fade-in
end point
Sets the cue point at the clip’s fade-in junction point (the left purple han-
dle in the volume envelope). The cue point will follow the handle if you
move it. See “Editing fades” on page 457.
Follows fade-out
start point
As the previous option, but for the fade-out start point.
Set at default
pregap position
Sets the cue point before the start of the clip, at a distance governed by
the default pre-gap position (set on the Edit view : Options menu).