User Manual

WAVELAB
19 – 450 The Audio Montage
• [Shift]-clicking on the envelope curve and dragging it left or right will select (and
move) the two nearest points to the right and left respectively.
You are constrained to horizontal movement using this method. This method is useful when
working with “Duck according to other track” (see “Duck according to other track” on page
453) since it allows you to quickly adjust the position of duck regions.
• Clicking and dragging the envelope curve up or down selects (and moves) all
points.
You are constrained to vertical movement using this method. Note that points set to the
minimum value are not affected (see “Muting a selected range of a clip” on page 451).
• Holding down [Alt] and dragging the envelope curve up or down adjusts the cor-
responding envelopes in all selected clips.
This is a quick way to adjust the level or pan of several clips at the same time (and also to
adjust both sides of a stereo envelope simultaneously).
Deleting volume envelope points
The junction points between the sustain and fade parts of the envelope
cannot be deleted.
There are three ways you can delete points:
• By double-clicking on a point.
• By right-clicking on the point and selecting “Delete point” from the envelope
speed menu.
• By selecting points and selecting “Delete selected point(s)” from the envelope
speed menu.
Resetting points and envelopes
There are various ways to reset the envelope:
• To reset a point to 0dB, right-click on the point and select “Reset point” from the
envelope speed menu.
• To reset the whole envelope curve to default, right-click the envelope curve and
select “Reset all” from the speed menu.
• To reset the sustain part of the volume envelope only, select “Reset sustain to
0dB” on the envelope speed menu.
All volume envelope points will be removed, but any defined fades will be left untouched.
This applies to volume envelopes only.