User Manual

WAVELAB
19 – 506 The Audio Montage
The Video view Options menu
There are two items on the Video view : Options menu:
• Play video in track (at cursor).
If this is ticked, the video frames will play back in the Track view at the cursor position. If this
is off, the frames will be displayed as non-animated thumbnail images.
• No video playback in track when this tab is open.
If both options are ticked, the frames will be displayed as non-animated thumbnail images
when the Video view is selected, but otherwise play back.
Editing video clips in the Montage
You can perform basic functions like moving the video clip by dragging it
in the time line, lock the clip position, use Split at cursor, copy and paste,
etc. All available functions are displayed on the clip speed menu for a
video clip.
Multichannel operation in the Montage
WaveLab supports the use of up to 8 ASIO inputs and outputs. Using a
multichannel audio interface with an ASIO driver you can route Montage
audio tracks to up to 8 separate channel outputs and up to 6 surround out-
puts. You can also record up to 8 channels simultaneously, which automat-
ically creates new tracks in the Montage, one for each recorded channel or
channel pair.
Setting up for multichannel operation
To be able to use WaveLab for multichannel/surround projects, you need
the following:
• An audio card/interface with multiple inputs and outputs (preferably 8).
• You have to select an ASIO driver in the Preferences–Audio device tab.