User Manual

WAVELAB
Data CD/DVD Projects 22 – 591
Note that at the end of the DVD burning process it can take up to 15 minutes
to close the DVD. Please be patient.
Closing method Here you can select a closing method. If you are adding the data por-
tion to a CD-Extra CD, you must select “Close CD” (see “CD-Extra
support” on page 575).
Simulation Here you define if and how a simulation should be performed before the
actual writing process. Simulating the writing process lets you find out
whether the writing process will be successful, or if problems might oc-
cur.
Write to hard
disk first
If this function is active (ticked), the writing program first writes an image
file onto your hard disk (which must have enough free space to hold the
file). An image file has the advantage that the data to be recorded doesn’t
have to be converted into CD format during burning, as this is done when
the image file is created. The actual burning (recording) procedure will
therefore be faster and performed with greater reliability and less risk of
malfunction.
Default Click on this button to save the current dialog settings as default. The
next time you open the dialog, they will automatically be set.
Advanced If you click the “Advanced” button, the dialog is extended downwards
and you get access to five tabs. These let you make a number of addi-
tional settings for the writing process.
Item Description