User Manual

WAVELAB
Customizing 32 – 737
Waveform elements
To change the waveform elements, right-click on a waveform (in the over-
view or in the main display), select Elements and then select the desired
item from the submenu that appears.
Note that you make separate settings for the main waveform display, the
overview and for the two channels in a stereo file! Which section you make
settings for depends on where you click.
Colors
To set the color of a certain element in the display, right-click in the Wave
window, select Colors and then select an element from the submenu that
appears. In the standard Windows color dialog that appears, select or de-
fine a color and click OK.
• For the display background colors, there are separate “top” and “bottom”
settings – the resulting display background will be a gradient “fade” from
the top color to the bottom color.
Item Description
Time Ruler Specifies whether or not the display should have a time ruler.
Level Ruler This only applies to the Main view display. It is used to set whether or
not there should be a ruler showing levels.
Solid/Dotted
Markers
These two (mutually exclusive) items are used to set the style of the
marker lines extending across the waveform. If neither is activated, the
marker lines are hidden.
Range Indicator
at top/bottom
The range indicator is a small “barber shop striped” bar that indicates
which part of the waveform is shown in the main display. These two
items are used to set whether it should appear at the top or bottom of
the overview.
Thin/Medium/
Fat Cursor
These three items are used to set the thickness of the cursor line.
Solid/Dotted
zero level axis
These two (mutually exclusive) items are used to set the style of the
line crossing the waveform at zero level (in the middle). If neither is ac-
tivated, the zero level axis is hidden.
Solid/Dotted
half level axis
As above, but for the two lines crossing the waveform at ±50% level.
End of file indicator Allows you to show/hide the line that indicates the end of the file.