User Manual

WAVELAB
6 – 92 Editing in the Wave window
Switching the selection between channels
If you have made a selection, you can move this to the other channel or
extend it to both channels by selecting the corresponding items from the
Select submenu (on the Edit menu). Or, you can press [Tab] to move the
selection between channels (if there is no selection, [Tab] moves the cur-
sor between channels).
Selection shortcuts
There are a number of ways to quickly make certain selections (for many
options there is more than one method):
To select… You can…
The area between two con-
secutive markers
• Double click between them.
• Depending on the type of marker, use one of the last three options
on the Select menu (on the Edit menu).
The area between any two
markers
• Double click between two markers, keep the mouse button
pressed and drag left or right.
The entire waveform • If there are no markers, double click.
• Triple click.
• Press [Ctrl]-[A].
• Select “All” from the Select menu on the Edit menu.
From the cursor to the fol-
lowing or previous marker
• Select “From cursor to previous/next edge” from the Select menu
(on the Edit menu).
• Hold down [Shift] and double click between the cursor and the
marker.
From the cursor to the be-
ginning or end of the file
• Select “From cursor to start/end of file” from the Select submenu
(on the Edit menu).
• Hold down [Shift] and double click to the left/right of the cursor
position.
• Press [Shift]+[Home] or [Shift]+[End].
All data between two start/
end CD, loop,
region or mute markers
• Hold down [Shift] and double click on either marker head.
Half or double the current
selection length
• Select “Halve the selection length” or “Double selection length”
from the Select menu on the Edit menu. These options are useful if
you are working with measures.
All audio data that makes up
a CD Track
• Click between the markers for the track and select “CD Track”
from the Select menu on the Edit menu.
• Hold down [Ctrl] and double click between the markers.
What was previously
selected
• Select “Toggle” from the Select menu on the Edit menu.
• Press [Esc].