User Manual

Wavetable Synthesis
Wavetable Editor
178
NOTE
• If you adjust the envelope or change the order of the waves while
Link Envelope Times to Marker Positions is activated, this option is
automatically deactivated, because the markers and the envelope are not
in sync anymore.
• If the wavetable consists of multiple sequences, this option is remembered
separately for each sequence.
Set Equal Times
The duration of the selected envelope segments is adjusted to equal times, that
is, to the arithmetic mean of the durations of the segments.
NOTE
This function can only be used if three or more consecutive segments are
selected.
Double Envelope Times
For the selected envelope segments, the times are doubled.
Halve Envelope Times
For the selected envelope segments, the times are halved.
Speed
Determines the rate at which the envelope plays through the wavetables. At +100
%, the envelope plays back at its original speed. A value of +50 % corresponds to
half the original speed, and +200 % to twice the original speed, for example.
This parameter is unipolar.
Position
The position of the cursor.
Loop Mode
• Off: If Playback Direction is set to a positive value, the wavetable plays from
the position cursor to the end.
If Playback Direction is set to a negative value, the wavetable plays from
the position cursor to the start.
• On: Depending on the Playback Direction setting, the wavetable plays
forward or backward in a loop.
• Alt: The wavetable plays in an alternate loop, that is, the loop is alternately
played forward and backward. The first direction depends on the Playback
Direction setting.
Loop Until Release
If this button is activated, the loop is repeated until you release the key on the
keyboard.
If this button is deactivated, waves outside the loop are not played when you
release the key.