User Manual

Included Instruments
Model C
290
On/Off
Activates/Deactivates the Phaser effect.
Rate
Sets the frequency of the phase modulation in Hertz.
Depth
Sets the intensity of the phase modulation.
Feedback
Adds resonances to the effect. Higher settings produce a more pronounced
effect.
Mix
Sets the ratio between the dry and the wet signal.
Delay
On/Off
Activates/Deactivates the Delay effect.
Delay Mode
With this dial, you can switch between the three available delay modes:
• St (Stereo) – This mode has two delays in parallel, one for the left and one
for the right audio channel, each with a feedback path of its own.
• Cross – This mode has two delays with cross feedback. Cross feedback
means that the delay of the left channel is fed back into the right delay and
vice versa.
• PP (Ping-Pong) – This mode mixes the left and right input and sends it to
hard-panned left and right delays. This way, the echoes bounce like a ping-
pong ball between left and right in the stereo panorama.
Delay Time
Sets the overall time for the left and right delay in milliseconds.
Feedback
Sets the overall amount of feedback for the left and right delay. Feedback means
the output of the delay is fed back to its input. At a setting of 0 %, you hear only
one echo. At a setting of 100 %, the echoes repeat endlessly.
Mix
Sets the ratio between the dry and the wet signal.