Quick Start Guide

PRECAUTIONS
UR-RT4/UR-RT2 Startup Guide 7
Notice
To avoid the possibility of malfunction/
damage to the product, damage to data, or
damage to other property, follow the notices
below.
■ Handling and Maintenance
• Do not use the device in the vicinity of a TV,
radio, AV equipment, mobile phone, or other
electric devices. Otherwise, the device, TV, or
radio may generate noise.
• Do not expose the device to excessive dust or
vibration, or extreme cold or heat (such as in
direct sunlight, near a heater, or in a car
during the day), in order to prevent the
possibility of panel disfiguration, unstable
operation, or damage to the internal
components.
• Condensation can occur in the device due to
rapid, drastic changes in ambient
temperature—when the device is moved from
one location to another, or air conditioning is
turned on or off, for example. Using the device
while condensation is present can cause
damage. If there is reason to believe that
condensation might have occurred, leave the
device for several hours without turning on the
power until the condensation has completely
dried out.
• Do not place vinyl, plastic or rubber objects
on the device, since this might discolor the
panel.
• When cleaning the device, use a dry and soft
cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated
wiping cloths.
• This disk containing the software is not meant
for use with an audio/visual system (CD
player, DVD player, etc.). Do not attempt to
use the disk on equipment other than a
computer.
• Even when the [ ] (Standby/On) switch is in
standby status (power lamp is off/ display is
off), electricity is still flowing to the instrument
at the minimum level. When you are not using
the instrument for a long time, make sure you
unplug the power cord from the wall AC
outlet.
• To avoid generating unwanted noise, make
sure there is adequate distance between the
AC adaptor and the device.
■ Connectors
• XLR-type connectors are wired as follows
(IEC60268 standard): pin 1: ground, pin 2: hot
(+), and pin 3: cold (-).
Information
■ About copyrights
• The software included in the CD-ROM and
the copyrights thereof are under exclusive
ownership by Yamaha Corporation.
• This manual is the exclusive copyrights of
Yamaha Corporation.
• Copying of the software or reproduction of this
manual in whole or in part by any means is
expressly forbidden without the written
consent of the manufacturer.
• This product incorporates and bundles
computer programs and contents in which
Steinberg Media Technologies GmbH and
Yamaha Corporation own copyrights or with
respect to which it has license to use others'
copyrights. Such copyrighted materials
include, without limitation, all computer
software, style files, MIDI files, WAVE data,
musical scores and sound recordings. Any
unauthorized use of such programs and
contents outside of personal use is not
permitted under relevant laws. Any violation of
copyright has legal consequences. DON'T
MAKE, DISTRIBUTE OR USE ILLEGAL
COPIES.
■ About this manual
• The illustrations and LCD screens as shown
in this manual are for instructional purposes
only.
• Steinberg Media Technologies GmbH and
Yamaha Corporation make no
representations or warranties with regard to
the use of the software and documentation
and cannot be held responsible for the results
of the use of this manual and the software.