User Manual

Panel Controls and Terminals
UR22mkII Operation Manual 6
6 [+48V] switch
Turns on and off the phantom power. When you turn
this switch on, phantom power will be supplied to the
XLR jack connected to the [MIC/LINE 1/2] jacks. Only
turn this switch on/off after connecting a phantom
powered condenser microphone to the device. Always
turn the phantom power switch to OFF when it is not
required.
NOTICE
When using phantom power, observe the following to
prevent noise and possible damage to UR22mkII or
connected equipment.
• Do not connect or disconnect any devices while the
phantom power switch is turned to ON.
• Set all output level controls to the minimum before
turning the phantom power switch to ON or OFF.
• When connecting devices not requiring phantom power
to the [MIC/LINE 1/2] jacks, make sure to turn the
phantom power switch to OFF.
NOTE
When the phantom power switch is turned on and off, all
inputs/outputs will be muted for a few seconds.
7 [LINE OUTPUT 2/R 1/L] jacks
For connecting to monitor speakers or external
devices with line level signals. These jacks can be
connected to phone-type (balanced/unbalanced).