User Manual

Software
UR816C Operation Manual 12
Meter Window
This window is for showing the meter at the top of the Main
window.
1 Level Meter
Indicates the signal level. Peak hold is normally set to on.
Setup Window
This window is for configuring the common settings of the
device.
1 Device
Selects the device when simultaneously connecting one
or more devices that are capable with dspMixFx UR-C.
2 Device Settings
Opens the Control Panel.
3 HPF Setting
Selects the cutoff frequency of the high pass filter.
Options: 120 Hz, 100 Hz, 80 Hz, 60 Hz, 40 Hz
4 Digital Mode
Selects the input and output signal format of the
[OPTICAL IN] and [OPTICAL OUT] jacks.
When ADAT is selected, the input and output signals of up
to eight channels at 44.1 kHz and 48 kHz, or up to four
channels at 88.2 kHz and 96 kHz, or up to two channels at
176.4 kHz and 192 kHz. When S/PDIF is selected, the
input and output signals of up to two channels at any
available sample rate.
5 OUTPUT ROUTING
Selects the MIX of the output jacks on the device. The
number of OUT options displayed here varies depending
on the sample rate or DIGITAL MODE setting.
ADAT
*The number of channels differs depending on the sample rate.
S/PDIF
*The number of channels differs depending on the sample rate.
6 OUTPUT LEVEL KNOB
Determines the [LINE OUTPUT] jack which is to be
affected by the [OUTPUT] knob on the front panel.
7 OUTPUT DIM
Determines the [LINE OUTPUT] jack which is to be
affected by the [DIM] switch on the front panel. Also, this
adjusts the attenuation level when the [DIM] switch is on.
8 OUTPUT MUTE
Determines the [LINE OUTPUT] jack which is to be
affected by the [MUTE] switch on the front panel.
9 Zoom
Changes the window size.
Options: 100%, 150%, 200%, 250%, 300%
Display color Description
Green Up to -18dB
Yellow Up to 0dB
Red CLIP
1
1
@95
2
3
4
6 7 8
)
!
Option Description
ADAT Input and output signals of up to 8 channels.
S/PDIF Input and output of 2-channel (stereo) signals.
Output jack Options
Main Output L/R MIX1 to MIX4
Line Output 1 L/R to 4 L/R MIX1 to MIX4
DAW Direct 1/2 to 7/8 *
ADAT 1/2 to 7/8*
ADAT Output 1/2 to 7/8 * MIX1 to MIX4
DAW Direct 1/2 to 7/8
Input 1/2 to 7/8
Output jack Options
Main Output L/R MIX1 to MIX4
Line Output 1/2 to 7/8 MIX1 to MIX4
DAW Direct 1/2 to 7/8 *
S/PDIF In L/R
S/PDIF Output L/R MIX1 to MIX4
DAW Direct 1/2 to 7/8 *
Input 1/2 to 7/8