User Manual

Software
UR816C Operation Manual 13
) Knob Mode
Selects the method of operating the knobs on dspMixFx
UR-C.
! Slider Mode
Selects the method of operating the sliders and faders on
dspMixFx UR-C.
@ About
Indicates the version of the firmware and software.
Settings Description
Circular Drag in a circular motion to increase and
decrease the parameter. Drag on a dial
clockwise to increase, and counterclockwise to
decrease. If you click any point on the knob,
the parameter will jump there instantly.
Linear Drag in a linear motion to increase and
decrease the parameter. Drag upward or
rightward to increase, and downward or
leftward to decrease. Even if you click any point
on the knob, the parameter will not jump there.
Settings Description
Jump Click any point on the slider and fader to
increase and decrease the parameter. If you
click any point on the slider and fader, the
parameter will jump there instantly.
Touch Drag the handle of the slider and fader to
increase and decrease the parameter. Even if
you click any point on the slider and fader, the
parameter will not jump there.