User Manual

Software

UR816C Operation Manual 16

Hardware Setup Window

This window allows you to configure general hardware

settings and Cubase-linked function settings.

1 model

Displays the name of the device.

2 HPF

Selects the cutoff frequency of the high pass filter.

Settings: 120Hz, 100Hz, 80Hz, 60Hz, 40Hz

3 Digital Mode

Selects the input and output signal format of the

[OPTICAL IN] and [OPTICAL OUT] jack.

When ADAT is selected, the input and output signals of up

to eight channels at 44.1 kHz and 48 kHz, or up to four

channels at 88.2 kHz and 96 kHz, or up to two channels at

176.4 kHz and 192 kHz. When S/PDIF is selected, the

input and output signals of up to two channels at any

available sample rate.

4 Scene

Automatically applies scene information to the UR816C

device when loading a Cubase project file containing

UR816C scene data.

NOTICE

Data saved to the device will be overwritten.

5 Channel Link

Automatically configures stereo links based on the bus

configuration in use.

Options Description

ADAT Input and output signals of up to 8 channels.

S/PDIF Input and output 2 channel signals.