User Manual

Using the Device in HA Mode
UR816C Operation Manual 30
Using the Device in HA
Mode
HA mode is a mode that uses the UR816C as a mic
preamp. It can be used as an extension of monitor output.
In HA mode, the connections from the [INPUT 1to 8] jacks
and the [OPTICAL OUT 1 to 8] jack are directly output as
shown in the table below. In this condition, input and
output cannot be performed at the USB port.
*1 The sampling rate cannot be set to 176.4 kHz or more
*2 The sampling rate cannot be set to 88.2 kHz or more.
WARNING
Make sure that you set all volume levels to minimum before
connecting or disconnecting the external device. Otherwise,
high-volume output may damage your hearing or the
equipment.
Connection Example
Operation
1. Use the [OPTICAL IN]/[OPTICAL OUT] jacks
(ADAT) to input and output audio signals
between the UR816C in HA mode and the
UR816C in normal mode.
2. Connect the [WORD CLOCK OUT] jack of
the UR816C in normal mode and the [WORD
CLOCK IN] jack of the UR816C in HA mode
with a BNC cable.
3. Set the clock source of the UR816C in HA
mode to [WCLK IN].
4. Set the clock source of the UR816C in
normal mode to [Internal].
5. Switch the OPTICAL of DIGITAL MODE of
UR816C in normal mode to [ADAT] in the
dspMix UR-C “Setup Window.”
The OPTICAL jack of the UR816C in HA mode is
always in ADAT format.
The operation is now complete.
How to Enable/Disable HA Mode
To switch between HA mode and normal mode, turn on
the power while simultaneously holding both the [DIM]
and [MUTE] switches.
All indicators on the front panel light for a moment when
the power is turned on.
Yamaha Steinberg USB Driver
In HA mode, the following control panel screen is
displayed. You can select the clock source and the
sample rate in the window.
Input Output
[INPUT 1] [OPTICAL OUT] 1
[INPUT 2] [OPTICAL OUT] 2
[INPUT 3] [OPTICAL OUT] 3
*1
[INPUT 4] [OPTICAL OUT] 4
*1
[INPUT 5] [OPTICAL OUT] 5
*2
[INPUT 6] [OPTICAL OUT] 6
*2
[INPUT 7] [OPTICAL OUT] 7
*2
[INPUT 8] [OPTICAL OUT] 8
*2
[OPTICAL IN] 1/2 [PHONES 1], [MAIN OUTPUT L/R],
[LINE OUTPUT 1L/R]
[OPTICAL IN] 3/4 [PHONES 2], [LINE OUTPUT 2 L/R]
*1
[OPTICAL IN] 5/6 [LINE OUTPUT 3 L/R]
*2
[OPTICAL IN] 7/8 [LINE OUTPUT 4 L/R]
*2
UR816C (HA mode)
rear panel
UR816C (normal mode)
rear panel
Monitor speakers
Computer