User Manual

Panel Controls and Terminals
UR816C Operation Manual 4
9 [PHONES 1/2] jacks
Adjusts the output signal level of the [PHONES] jack.
) [LOCK] indicator
Lights up when the selected clock source and the word
clock source are synchronized. The indicator flashes
continuously when they are not synchronized.
! [USB] indicator
Lights up when the power is turned on and the unit is
communicating with the computer or iOS device. The
indicator flashes continuously when the computer or iOS
device does not recognize the device.
@ [OUTPUT] knob
Adjusts the output signal level of the [MAIN OUTPUT]
jacks. Also, adjusts each output signal level of the [LINE
OUTPUT] jacks. To select the output signal of the
[PHONES 1/2], refer to the “Setup Window” (page 12) in
the section “dspMixFx UR-C.”
# POWER indicator
Lights up when the power is turned on.
$ [MUTE] switch
Turn the mute on (lit) and off (unlit). When you turn this
switch on, the output signal of [MAIN OUTPUT] jack will
be muted. You can also mute the output signal of each of
the [LINE OUTPUT] jacks. To select the [LINE OUTPUT]
jack, refer to the “Setup Window” (page 12) in the section
“dspMixFx UR-C.”
% [DIM] switch
Turn the dimmer on (lit) and off (unlit). When you turn this
switch on, the output level of [MAIN OUTPUT] jack will be
attenuated set in “Setup Window” (page 12) in the section
“dspMixFx UR-C.” You can also turn the dimmer on of the
output signal of each [LINE OUTPUT] jacks. To select the
[LINE OUTPUT] jack, refer to the “Setup Window”
(page 12) in the section “dspMixFx UR-C.”
^ Power switch
Turn the power on [ I ] and off [P].