Triebwerk

Table Of Contents

Macro Page Parameters

The Amp Section

In the Amp section, the following parameters are available:

Level

Adjusts the level of the program. If you add distortion to the filter by increasing the

Drive parameter, you may have to adjust the level to compensate for an increase in

gain.

Velocity

Here, you can specify the influence of the incoming MIDI velocity on the amp envelope

modulation depth.

• Set the Velocity parameter to positive values to reduce the intensity of the

envelope for decreasing velocities.

• Set the Velocity parameter to negative values to reduce the intensity of the

envelope for increasing velocities.

Pan

Adjusts the panorama position of the signal. This is particularly useful for drum sets

and sliced loops, where you can specify the pan position individually for each drum

instrument or slice.

Attack

Increases or decreases the attack time of the amplifier envelope. Positive values

increase the attack time.

Decay

Increases or decreases the decay time of the amplifier envelope. Positive values

increase the decay time.

Sustain

Increases or decreases the sustain time of the amplifier envelope. Positive values

increase the sustain time.

Release

Increases or decreases the release time of the amplifier envelope. Positive values

increase the release time.