V-Stack

V-STACK
8 – 106 Audio effects
4. By default, the effect processor is activated when selected. This is in-
dicated by the On button. Make sure this is lit.
5. Make sure the effect output is routed to the desired output bus, by
checking the Bus pop-up (below the File pop-up).
6. If you wish to activate more effects, repeat steps 2 to 5.
Remember that the effects rely heavily on the CPU power in your computer. The more
activated effect units, the more computer power will be used for effects.
• To turn off an effect completely, pull down the effect type pop-up menu
and select “No Effect”.
You should do this for all effects that you don’t intend to use, to minimize unnecessary
CPU load.