V-Stack

V-STACK
Remote controlling the Mixer 9 – 129
JL Cooper CS-10
The CS-10 can remote control 32 channels (in groups of 8). The fol-
lowing CS-10 controls will remote control the following parameter for
each channel strip:
• Fader: volume
• Solo and Mute: solo and mute
• Sel: select channel for editing
The following parameters can be remote controlled for each selected
channel using the six rotary knobs on the CS-10:
• The CS-10 function keys 1 - 4 are used to select channels 1 - 32 in
groups of 8.
Function key 1 selects channels 1 - 8, function key 2 selects channels 9 - 16, and so on.
• If you hold down the function key “Shift” and then move a fader, the
two indicators beside the fader will indicate whether the fader position
is below or above the current fader level in V-STACK.
If the upper indicator is lit, the fader position on the panel is above the fader level in
V-STACK and vice versa. When both indicators are dark, the fader positions are
matched for that channel.
❐ The CS-10 supports “MIDI Feedback”, allowing the mute, solo and selec-
tion status of the channels in V-STACK to be indicated on the panel. For
this (and the fader position indication described above) to work, you
need a two-way MIDI connection between the CS-10 and V-STACK.
Dial Parameter
Send 1 Effect send 1
Send 2 Effect send 2
Pan Pan
Boost/cut EQ 1 Gain
Frequency EQ 1 Frequency
Bandwidth EQ 1 Q Factor