V-Stack

V-STACK
Remote controlling the Mixer 9 – 131
Roland MCR-8
❐ Before you can initiate remote control operation, the MCR-8 “Mode” switch
must be set to “4”.
The Roland MCR-8 can control 16 Mixer channels. The “A/B switch”
is used to switch between controlling channels 1 - 8 and 9 - 16. The
following MCR-8 parameters control the equivalent parameters for
each channel strip:
• Fader level, mute, solo and pan.
❐ The MCR-8 does not support “MIDI feedback”, that is, the current status of
parameters in V-STACK is not indicated on the MCR-8. Therefore, you only
need a one-way MIDI connection between the MCR-8 and V-STACK.