V-Stack

V-STACK
9 – 132 Remote controlling the Mixer
Radikal Technologies SAC-2K
The SAC-2K can control 32 channels (in groups of 8). The following
SAC-2K parameters control the equivalent parameters for each chan-
nel strip:
• Fader: volume
• Solo and Mute: solo and mute (depending on the solo/mute state
switch)
• Select: select channel for editing in Channel Strip mode
Encoder operation modes and display layout
The SAC-2K supports two operation modes for the encoder dials and
the display. Mixer Mode will assign the same parameter for each chan-
nel strip to the encoder dials, e.g. EQ1-Gain for each channel. Channel
Strip mode will assign a parameter set for one selected channel to the
encoder dials, e.g. all 8 send levels for the selected channel.
The first row of the displays above the channel strips will display the
name of the channels. The second row will display the value of the pa-
rameter assigned to the encoder dials. The first row of the rightmost
display will show the name of the selected channel, the assignment
for the encoder dials and the channel range. The second row will dis-
play any value of the parameter assigned to the encoder dials in Chan-
nel Strip mode:
• Display for encoder operation in Mixer mode “Pan”:
• Display for encoder operation in Channel Strip mode “EQs”:
In order to access all parameters of a parameter set with the encoder
dials, the parameter set buttons need to be pressed repeatedly to cy-
cle through the parameter assignments.
Chn1
Pan
Chn2
Pan
Chn3
Pan
Chn4
Pan
Chn5
Pan
Chn6
Pan
Chn7
Pan
Chn8
Pan
Chn1 Pan VST 1-8
Chn1
Freq1
Chn2
Freq2
Chn3
Freq3
Chn4
Freq4
Chn5
Freq5
Chn6
Freq6
Chn7
Freq7
Chn8
Freq8
Chn1
Q1
EQ
Q2
VST 1-8
Q3 Q4