V-Stack

V-STACK
Installation and requirements for Windows 2 – 17
Testing the Card
To make sure the audio card will work as expected, perform the fol-
lowing two tests:
• Use any software included with the audio card to make sure you can
play back audio without problems.
• If the card is accessed via a standard Windows driver, use the Media
Player application (included with Windows) to play back audio.
Installing a MIDI interface
Installation instructions for a MIDI interface should be included with
the product. However, here’s an outline of the necessary steps:
1. Install the interface inside your computer or connect it to a “port” (con-
nector) on the computer.
Which is right for you depends on which type of interface you have.
2. If the interface has a power supply and/or a power switch, turn it on.
3. Install the driver for the interface, as described in the documentation
that comes with the interface.
It is likely that you will need a CD ROM or floppy disk supplied by the manufacturer of
the MIDI interface. Also please make sure to check the manufacturer’s web site for up-
dated drivers.