V-Stack

V-STACK
Setting up your system 4 – 29
Setting up audio (stand-alone)
This section describes how to set up your system for basic VST Instru-
ment playback – setting up VST System Link is described on page 35.
❐ Always make all connections with all equipment turned off!
Connecting audio
Making audio connections is a relatively simply matter in V-STACK:
you just need to connect the outputs on your audio interface to your
listening equipment, recording devices, etc.
• If you are using an audio interface with a single stereo output, you would typi-
cally connect the outputs to an amplifier, powered monitors, headphones, etc.
• If your audio interface has more than a single stereo output, you would typi-
cally connect the outputs to a hardware mixer.
Driver and helper application setup
The audio hardware setup application
Most audio cards come with one or more small applications that allow
you to configure the inputs of the hardware to your liking.
This includes:
• Selecting which outputs are active.
• Setting levels for the outputs, so that they match the equipment you use for
monitoring.
For more details about your audio hardware setup application please
refer to the documentation that came with the hardware.