V-Stack

V-STACK
7 – 80 The Mixer
Channel View Sets
Channel View Sets are user definable configurations of the Mixer win-
dows. If you are working with a large number of channels, it may be
convenient to be able to hide certain channels (or channel types). Pro-
ceed as follows:
1. Set up the Mixer the way you wish to store it as a View Set.
The following settings will be stored:
• Settings for individual channel strips (e.g. narrow or wide mode and whether
the channel strip is hidden or not).
• The hide/show status for channel types and for the Master section.
• Settings for what is shown in the extended view of the Mixer.
❐ The Mixers’ display status (whether Normal or Extended mode is se-
lected) is not saved with the View Set.
2. When you have set up the Mixer as you want it, click the “Create/Se-
lect Channel View Sets” button at the bottom of the Common Panel,
and select “Add” from the pop-up menu that appears.
By selecting from the items on this menu, you can create, load and delete View Sets. If
no View Sets have been stored there will only be two items on the menu: Add and
Remove.
The items at the top of the menu in the picture to the right are previously stored
Channel View Sets.
3. A dialog appears, allowing you to type in a name for the View Set.
Do so and click OK to store the current Mixer View Set.