V-Stack

V-STACK
The Mixer 7 – 97
Saving Mixer settings
It is possible to save complete Mixer settings for selected or all audio
channels in the Mixer. These can then later be loaded into any project.
Channel settings are saved as Mixer settings files. These have the
Windows file extension “.vmx”.
Right-clicking (Win) or [Ctrl]-clicking (Mac) somewhere on the Mixer
panel or in the Channel Settings window brings up the Mixer context
menu where four Save/Load items can be found. The following op-
tions are available:
• “Save Selected Channels” will save all channel settings and the output bus
routing for the selected channels.
Effects loaded in the VST Send Effects panel will not be saved. Thus, the send routing
assigned for the selected channel(s) will not be saved, although the send levels, pre/
post and on/off settings are. Insert effects settings are saved.
• "Save Master, Sends and VSTi" will save the Master setup, VST output bus
levels and active status, Master mix level, and all assignments and settings in
the VST send effects, VST Instruments and Master effects panels.
You do not have to select channels for this operation.
• “Save Master Fx” will save current Master effects configuration and settings.
• “Save All Mixer Settings” saves everything.
This is the same as using “Save Selected Channels” with all channels selected, and
using “Save Master, Sends and VSTi” and “Save Master Fx”, all in one go.
When selecting any of these items, a standard file dialog opens where
you can select a name and storage location on your disk for the file.