manual

12.5 Sonnox DeBuzzer 331
4. Adjust the Attenuation to find the most pleasing audio; too much attenuation can impair
the audio, either by reducing brightness or by introducing low-level distortion.
Tip: You might be working with bandwidth-limited material, possibly as a result of samplerate
conversion or lossy compression (for example limited at around 10kHz). If you experience
distortion around the limit try reducing the HF Limit control. Adjust until it lies just to the
lower frequency side of the limit (around 9.5kHz in our example).
Related topics
Sonnox DeBuzzer
Sonnox DeClicker
Audio Plug-ins
Master Section
How do I add effects?
Presets
12.5 Sonnox DeBuzzer
Sonnox DeBuzzer is one of three plug-ins that form the Sonnox Restoration Toolkit. The
tools are not just for restoring old material, but also for removing the clicks, pops, buzzes and
background noise that can sometimes accidentally occur in new recordings.
A note on Touch Pad controls
Several controls in these plug-ins are Touch Pads. These controls give a clear display of the
numeric value of a control, and respond to the following actions:
Left-Click and drag up/down: Increase/decrease the value
WaveLab 7