User manual

- 12 - - 13 -
GB
Dimensions (H x W D): L 900 195 x 80 x 86 mm
L 910 235 x 80 x 86 mm
Mains voltage: 220 – 240 V, 50/60 Hz
Output: L 900 7 W / 400 lm / 57 lm/W
L 910 11 W / 750 lm / 68.2 lm/W
Light colour: 3000 Kelvin (warm white)
LED life expectancy: 30 years
Angle of coverage: 180°
Detection reach: 5 or 12 m
Light-level setting: 2 or 20 Lux
Time setting: 2 or 15 min
Effect lighting: optional, by DIP switch
Manual override: selectable, 4 h
IP rating: IP 44
Protection class: II
Temperature range - 20° C to + 40° C
Technical Specifications
Troubleshooting
SensorLight without power
L Fuse faulty, not switched
ON, break in wiring
L Short-circuit
L Replace fuse, turn ON
mains switch, check lead
with voltage tester
L Check connections
Malfunction Cause Remedy
SensorLight will not switch
ON
L Mains switch OFF
L Fuse faulty
L Switch ON
L Fit new fuse, check
connection if necessary
SensorLight will not switch
OFF
L Continuous movement in
the detection zone
L Check detection zone and
re-adjust if necessary
SensorLight will not switch
OFF completely
L Basic lighting level selected L Check DIP 1 and DIP 2
SensorLight switching ON
when it should not
L Wind is moving trees and
bushes in the detection
zone
L Cars in the street are being
detected
L Change zone
L Change zone
This STEINEL product has been manufactured
with utmost care, tested for proper operation
and safety and then subjected to random sam-
ple inspection. Steinel guarantees that it is in
perfect condition and proper working order.
The warranty period is 36 months and starts on
the date of sale to the consumer. We will reme-
dy defects caused by material flaws or manu-
facturing faults. The warranty will be met by
repair or replacement of defective parts at our
own discretion. The warranty shall not cover
damage to wear parts, damage or defects
caused by improper treatment or maintenance.
Further consequential damage to other objects
shall be excluded. Claims under the warranty
will only be accepted if the unit is sent fully
assembled and well-packed with a brief de-
scription of the fault, a receipt or invoice (date
of purchase and dealer's stamp) to the appro-
priate Service Centre.
Service:
Our Customer Service
Department will repair faults
not covered by warranty or
after the warranty period.
Please send the product
well-packed to your nearest
service station.
Functional Warranty
Declaration of Conformity
This product complies with
- Low Voltage Directive 2014/35/EC
- EMC Directive 2014/30/EC
- RoHS Directive 2011/65/EC
- WEEE Directive 2012/19/EC