Instructions

- 24 - - 25 -
GB
1. About this document
Please read carefully and keep in a safe place.
– Under copyright. Reproduction either inWhole or in part onlyWith our
consent.
– Subject to change in the interest of technical progress.
– All product dimensions in mm.
Symbols
!
HazardWarning!
...
Reference to other information in the document.
2. General safety precautions
!
Disconnect the power supply before attempting any
Work
on the sensor switch.
• During installation, the electric power cable being connected must not be
live. Therefore, switch o the power first and use a voltage tester to make
sure theWiring is o-circuit.
•
• Installing the sensor switch involves work on the mains voltage supply.
This work must therefore be carried out professionally in accordance with
national wiring regulations and electrical operating conditions (e.g.
DE: VDE 0100, AT: OVE-EN 1, CH: SEV 1000).
3. IR180UPeasy/IR180APeasy
Proper use - IR180UPeasy:
– Sensor switch for concealed installation in dry interior spaces.
Proper use - IR180APeasy:
– Sensor switch for surface installation in dry interior spaces and those
exposed to moisture.
The sensor switches are equipped with a pyro sensor which detects the invisible
heat emitted by moving objects (people, animals etc.). The heat detected in this
way is converted electronically into a signal that switches a connected load ON
(e.g. a light).
Heat is not detected through obstacles, such as walls or panes of glass, and will
therefore not activate the light.
The sensor switch is designed for both 2 and 3-wire electrical systems.
Package contents - IR180UPeasy (Fig.3.1)
Package contents - IR180APeasy (Fig.3.2)
Product dimensions - IR180UPeasy (Fig.3.3)
Product dimensions - IR180APeasy (Fig.3.4)
Product components - IR180UPeasy (Fig.3.5)
A Load module
B Twilight setting
C Time setting
D Connecting terminal screw shaft
E Connecting terminal cable duct
F Surround
G Sensor module
H Switch for light function
Product components - IR180APeasy (Fig.3.6)
A Surface-mounting enclosure
B Twilight setting
C Time setting
D Connecting terminal screw shaft
E Connecting terminal cable duct
F Load module
G Sensor module
H Switch for light function
I Cover
Detection zone (Fig.3.7)
4. Electrical connection
Connection wiring diagram: two-wire (Fig.4.1)
Connection wiring diagram: three-wire (Fig.4.2)
Connection wiring diagram: interconnecting several sensor switches (Fig.4.3)