Manual

Product Overview
120V
60Hz
PIR
IP54
360°
Ceiling
mount
Applications
• Exterior: entryways, carports,
balconies, building soffi ts
• Interior: corridors, vestibules, garages
Intended uses
• Suitable for automatic switching of
lights
• NOT suitable for alarm systems
In this package
• IS 360 sensor
• Accessory pack (2 fastening screws, 2
anchors, 2 rubber plugs, 3 wire nuts, 2
lens shrouds)
• Installation instructions
Needed for installation
• For exterior installation: 1 NEMA
watertight round 4-inch junction box
• For interior installation: 1 octagon
4-inch junction box
Note: mounting screw holes are 3.5” apart
IS 360 Installation Overview
Environmental considerations
• Weather can affect operation of the
sensor. Strong gusts of wind, snow,
rain and hail can cause switching
errors, since the sudden temperature
changes cannot be distinguished from
heat sources.
www.steinel.net [phone]
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor must be installed and used in accordance with appropriate electrical codes
and regulations
• Installation by a qualifi ed electrician is recommended
Voltage 120 VAC, 60 Hz
Load rating 0-600 watt Tungsten
0-300 watt Ballast
Time delay 10 sec to 15 min
Light level .2 - 200 footcandles
2 - 2000 lux
Coverage 360°, up to 40 foot reach
Environment Rated IP54 raintight
-4°F to +122°F
-20° C to +50°C
Dimensions 3.9 x 4.7 x 4.7 in
100 x 120 x 120 mm
5 year warranty
UL Listed, CSA Approved, RoHS Compliant
Specifi cationsProduct description
The STEINEL IS 360 occupancy sensor
automatically turns lights ON when presence
is detected and OFF when a space is left
vacant, enhancing security, convenience and
energy savings. The sensors are raintight for
safe, reliable operation indoors and out.
www.steinel.net [phone]
2
40 ft
40 ft
40 ft
40 ft
40 ft
Mounting plate
Sensor housing
Decorative ring
(adjustments beneath)
Housing cover
Coverage shroud
Detection lens
1 4
2 5
3 6
1
4
5
6
2
3
3