User manual
15 16
User interface
User interface / Laser measurements
Measurement range and accuracy:
The measurement range of the NIGHTHUNTER 8x30 LRF is between 25meters/27yds and 1,700
meters/1,860 yds. In this respect, the range depends on the weather conditions, the visibility and
reflection characteristics of the target:
Range: greater smaller
Object colour: white black
Angle to the object: perpendicular acute
Object size: large small
Atmospheric conditions: clear, homogeneous misty, inhomogeneous
Object structure: e.g. house wall e.g. bush, tree
In the event of sunshine and good visibility, the following ranges and accuracies apply:
± 1.0m/yds up to 300m/328yds,
± 2.0m/yds up to 600m/656yds,
± 0.5% above 600m/656yds
User Interface
Measurement and setting mode
The display shows „----“ if:
- the distance is less than 25 meters
- the distance is more than 1,700 meters
- the reflection characteristics
are insufficient
A low level of battery
is indicated by a flashing display
Auto OFF after 5 seconds
Individual measurement
Start a measurement in m/yds by pressing the B1 button
Hold, target the object
and release
Change from metres to yards
by pressing the B2 button. Saving and Auto OFF after 3 seconds
Auto OFF after 20 seconds
Scanning operation
Continuous measurements every 1.5 seconds
for a period of 20 seconds
Press and hold
for approx. 4 seconds
Press and hold
for approx. 3 seconds
B1 = ON
B1
B2
GB